Wolfgang FG or PPE?

[Mydnyghte]

My Mustang gets a deep detail once a year, the rest of the time it stays garaged. (It's amazing what small kids do to your free time......)
Last year I went through the Blackfire gauntlet of product, this year I'm going back to Wolfgang. Yesterday I gave her a good, sudsy, bath with CG citrus wash red, and am getting ready to give her a good shine.
In my arsenal, I've got some FG and PPE. The paint is not in bad shape, just some minor mars here and there. In the past I've just gone with PPE then hit it with Fuzion, but wasn't sure if FG would yield any better results? I've used it before with TSR, when the paint was bad, but that is not currently the case.
Any and all input is appreciatedIm the MAN

[Mike@DedicatedPerfection]

In the attached pictures I can see marring.

In this case you will need FG without a doubt as it contains abrasives. This will be needed to remove those issues in the paint. I would start out with a polishing pad. Which machine and pads do you have?

PPE contains no abrasives and therefore will do nothing to the affected paint.

[Mydnyghte]

I was leaning more towards the FG the more I looked over the paint. I've got a PC and all the colors of the rainbow in pads.

[Mike@DedicatedPerfection]

FG for sure.

Start off with FG on a polishing pad.