View Full Version : Help with buffing custom paint
king air pilot
09-09-2007, 10:58 AM
Hello All,
I am doing a small cuatom paint job. I have wet sanded it to 1200 grit. I just recieved my Menzerna kit from AG. The intensive polish states it gets out 2000 grit scratches.I am really looking forward to trying out my new kit. Any thoughts on what to use between the 1200 grit and the intensive polish.
Thanks
Mike
budman3
09-09-2007, 11:10 AM
Use 2000 grit ... or higher grit.
It's going to be very hard to sand out 1200 grit sanding marks with a polish.
What machine are you using?
king air pilot
09-09-2007, 11:19 AM
Use 2000 grit ... or higher grit.
It's going to be very hard to sand out 1200 grit sanding marks with a polish.
What machine are you using
Bud,
Just got the 7424, But this is a smaller item so I will be using a fair amout of elbow grease.
Mike
StephenK
09-09-2007, 11:24 AM
1000 grit sanding marks and used the IP and black EDGE 2K Wool
before
http://www.autogeekonline.net/forum/attachments/show-n-shine/1740d1186795180-played-new-toys-p8090203.jpg
after 50/50 shot
http://www.autogeekonline.net/forum/attachments/show-n-shine/1741d1186795190-played-new-toys-p8090205.jpg
as you can see that combo took care of 1000 grit. it should work on your 1200 grit. just follow up with a finishing polish and finishing pad
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.