2013 bmw 750li (jet black)

[cousineau18]

So I am going to be detailing my friends 7 series this weekend. I have done my 08 Corvette which had swirl/water marks from hell and had no issues at all.

For the Corvette I used:

Clay
M105
M205
Hex Logic 5.5" Orange and White pads
Rejex for the sealant

It worked out perfect and very easy. So I have heard some issues of the Jet Black marring and very hard to correct swirls. I know the typical answer will be do a test spot no larger than 2X2, but other than starting out with a White Hex-Logic pad and M105 is there anything else someone could recommend.

Appreciate the help.

Mike

[tenblade2001]

I would post a pic of the areas your going after..would help to know how bad the defect is.

[cousineau18]

If you go to this link since I am having issues uploading the original, this picture is a good representation of what it looks like but maybe 10% less intenese

http://www.soft99.co.jp/english/howto/body/images/care16/img_01.jpg

[Savenn01]

I love that car.

[cousineau18]

I love that car.

It's a great car and rides amazing

[Mike@DedicatedPerfection]

German paint love German polish...

I have a pair of Jet Black 3 series. (07 & 11)

Mike

[cousineau18]

Well I have Wolfgang Total Swirl Remover, so I guess I can start with that.