Need help with my pressure washer

[Autogeeksk]

Hi everyone,

I just recently purchased a Pulsar PWE2000.
It works great as a pressure washer, so far no issues.

However, Im trying to get it setup with my MTM foam cannon.

Ive been searching for days for an adapter or any fitting that could make the two connect.

I was hoping someone here would know how I could get the two connected or if i can at all.

Here is a link to the unit I have http://www.amazon.com/Pulsar-PWE2000-Electrical-Pressure-Washer/dp/B00EFZQC6W

Any help would be appreciated!

[Ccrew]

I looked, even went so far as to download the owners manual.

What's unclear is whether the connection from the trigger unit to the lance is a quick disconnect or not. Other than waiting for someone here that may have one, a picture of that connection may be worthwhile. It's Parts #137 and 138 on Page 20 in the Owners manual, looks like the lance disconnects right at the front plastic part of the trigger assembly.

Picture of the lance on Page 13 looks to be a Bosch or maybe Karcher bayonet connector. My bet's on the Bosch

Bosch: Bosch Pressure Washer Fitting (http://www.autopia-carcare.com/pw-bosch.html?productid=pw-bosch&channelid=FROOG&utm_source=CSEs&utm_medium=GoogleProductSearch&utm_campaign=CSE#.VW9c2FxVhBc)

[Autogeeksk]

I looked, even went so far as to download the owners manual.

What's unclear is whether the connection from the trigger unit to the lance is a quick disconnect or not. Other than waiting for someone here that may have one, a picture of that connection may be worthwhile. It's Parts #137 and 138 on Page 20 in the Owners manual, looks like the lance disconnects right at the front plastic part of the trigger assembly.

Picture of the lance on Page 13 looks to be a Bosch or maybe Karcher bayonet connector. My bet's on the Bosch

Bosch: Bosch Pressure Washer Fitting (http://www.autopia-carcare.com/pw-bosch.html?productid=pw-bosch&channelid=FROOG&utm_source=CSEs&utm_medium=GoogleProductSearch&utm_campaign=CSE#.VW9c2FxVhBc)

Wow! ive been sitting here staring at my fitting and the one you posted a link for and i think its a match.. I already bought the AR Blue Clean bayonet adapter and upon receiving it i realized that its not going to work.

I have not much to lose at this point and Im going to order that piece. Ill see if it works out and post back here.

Thanks!

[Autogeeksk]

Here is a picture of my attachment. Looks very similar.

[Ccrew]

Yeah, Def looks like Bosch. Enough so that I'd buy one.

From the owner of a Greenworks electric that uses the same fitting, don't waste gas trying Lowes/Home Depot, etc. They don't carry it. Yeah, I learned that the hard way.