View Full Version : Do I have to wait until it dries?
dhsv2
04-29-2015, 12:23 AM
Meguiars #21 Synthetic
Do I have to wait until it dries?
Setec Astronomy
04-29-2015, 12:24 AM
Yes.
dhsv2
04-29-2015, 01:43 AM
I've waited more than 5 hours and I do not dry
dhsv2
04-29-2015, 01:45 AM
Yes.
I've waited more than 5 hours and do not dry
LavJordan
04-29-2015, 03:28 AM
What do you mean it has not dried?
FUNX650
04-29-2015, 07:50 AM
OK..,Let's assume that M21 2.0 has now dried.
What are you going (or wanting, or planning)
to do to it next? TIA.
Bob
Ncs0816
04-29-2015, 07:55 AM
5 hours is more than enough
Sent from my iPhone using Tapatalk
Mike Phillips
04-29-2015, 09:14 AM
Should dry in about 15 to 20 minues if you're applying a thin coat.
What are you working on?
:)
dhsv2
04-29-2015, 02:33 PM
applying a thin coat.:buffing:
Souldetailer
04-29-2015, 02:54 PM
Testing the wax to see if it has dried is very easy. Use your fingertip and run it through the applied wax, if your finger leaves a clean area and no oily reside behind, you are ready to buff. If this is NOT the case you need to wipe off and depending on the results, reapply, if it looks good to you, carry on. Good luck.
Peace,
Darrin
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.