NeoSquall
02-27-2015, 09:08 AM
need some help on this. What could this be?
http://i1379.photobucket.com/albums/ah123/NeoSquall/IMAG1807_zpshx36i6oh.jpg
http://i1379.photobucket.com/albums/ah123/NeoSquall/IMAG1806_zpso7zv4xbf.jpg
A little background on the paint.
1. This is a new car which is around 3-4weeks old out from the dealer.
2. The location of the picture was at the driver side fender and door.
3. I have tried correcting it before I took the picture starting with a Makita 9227c with a white pad and Menzerna PF2200 at 1200-1300rpm with 4 slow passes, I still cant remove and I moved on to LC yellow pad with M101 with the same speed. It refuses to go, then I hit it again with same speed but 6 passes. It still like this. I dare not go anymore without risking removing more paint than I would want to.
4. I did a IPA wipe, still the same. I took out my wax and silicone remover(or panel wipe), still the same.
what could this be?
http://i1379.photobucket.com/albums/ah123/NeoSquall/IMAG1807_zpshx36i6oh.jpg
http://i1379.photobucket.com/albums/ah123/NeoSquall/IMAG1806_zpso7zv4xbf.jpg
A little background on the paint.
1. This is a new car which is around 3-4weeks old out from the dealer.
2. The location of the picture was at the driver side fender and door.
3. I have tried correcting it before I took the picture starting with a Makita 9227c with a white pad and Menzerna PF2200 at 1200-1300rpm with 4 slow passes, I still cant remove and I moved on to LC yellow pad with M101 with the same speed. It refuses to go, then I hit it again with same speed but 6 passes. It still like this. I dare not go anymore without risking removing more paint than I would want to.
4. I did a IPA wipe, still the same. I took out my wax and silicone remover(or panel wipe), still the same.
what could this be?