PDA

View Full Version : DG Aquawax Application



spewking
01-18-2015, 06:11 PM
Loved my first application today and had a couple of application questions.

Do you apply with one MF towel and wipe with another?

Do you wipe lightly for both initial and final wipes?

It seemed like if I sprayed one area ahead of where I was wiping...e.g., let the wax sit for just a minute....before I started wiping it helps coverage and contact? Maybe I'm crazy but have you done this?

On first use, this stuff is slick and shiny. In a word....AWESOME!!! Can't wait to see what is does for my G35 for the next couple weeks of winter.

Recommended.

Kamakaz1961
01-18-2015, 07:49 PM
IMO you can't go wrong with any technique of application with Aquawax. 1 MF towel Spray and wipe. 2 MF towels 1 wipe 1 follow-up. It does not matter. That is some really good stuff!!

The best thing whatever technique you use is fine....the fact you are diggin the Aquawax like most people here is fun.

I experiment just like you. I like 2 MF towels. Spray wipe and follow up with dry MF wipe.

Either way you are not doing anything wrong!!

kbmag1
01-18-2015, 08:27 PM
2 MF towels as the first one usually gets to saturated with product.

davey g-force
01-18-2015, 08:31 PM
:iagree:

Klasse Act
01-18-2015, 08:55 PM
I've been using AW for sometime now and just spray it on the car,wipe down with my mf towel and flip over to a dryish spot as needed. If its kinda cool or dampish you'll need a couple towels but when its warm out, one is all I ever need.

conman1395
01-18-2015, 09:01 PM
What about when your car is still wet?

wdmaccord
01-18-2015, 09:20 PM
What about when your car is still wet?

2 towels almost always for me. Most of the time I am applying while there is still some water on the paint (after a 2BM or during a RW). So first towel wipes the product around to nearly dry then the final dry towel finishes it off.

VISITOR
01-18-2015, 11:38 PM
in colder temps I use 2 mf towels, otherwise 1 works fine. spray onto panel, lightly spread it around and then flip to the other side and buff off...

FASTFRED
01-19-2015, 03:10 PM
I use the two towel method with no problems. :xyxthumbs:

Legacykid
01-19-2015, 03:59 PM
I also use 2 towels, sometimes get away with one, depending on how saturated the MF is, love AW

dad07
01-19-2015, 05:00 PM
2 towels here too......light spray on panel spread with one and lightly buff with another.
Hot or cold, wet or dry......easy.

feslope
01-19-2015, 05:37 PM
What about when your car is still wet?I apply a couple sprays per panel and dry normally. works great.