View Full Version : Possible dumb question about GTechniq G1 glass
rms64
01-16-2015, 06:48 PM
This afternoon I completed polishing my glass (again) with Ceriglass / rayon pad combination and am now applying G1 as I type. Well, it's hazing as I type.
Anyway, instructions state 3 coats - is this 1 coat, use G2 to remove, reapply G1, etc...
Or,
Apply G1 3 times then G2 to buff out....?
Feed back please
expdetailing
01-16-2015, 07:52 PM
I know nothing about this product, but since noone has come forward, I will at least offer you a guess. I would go with your first statement.
rms64
01-16-2015, 08:03 PM
I know nothing about this product, but since noone has come forward, I will at least offer you a guess. I would go with your first statement.
Thank you Sir....well, I went the other way :D
Assumed 3 coats was to ensure good coverage so couldn't see why to remove in-between. Seems to have worked out fine.
Now, just have to wait for some rain! :dblthumb2:
allenk4
01-16-2015, 10:34 PM
http://youtu.be/Hy2E755jvjc
goldenlight
01-17-2015, 05:27 PM
I used this product only once.. apply 1 coat every 15 minutes, after the 3rd coat. remove with a terry cloth towel or waffle weave using alcohol or the R2 remover. I find its best to remove a small section at a time.
I admit you don't have to apply it as often but the cost is high. I personally preferred Gtechniq g5 I feel I get more for my money.
rms64
01-17-2015, 06:03 PM
http://youtu.be/Hy2E755jvjc
Thanks! Turns out I pretty much followed this process and all went well.
I used this product only once.. apply 1 coat every 15 minutes, after the 3rd coat. remove with a terry cloth towel or waffle weave using alcohol or the R2 remover. I find its best to remove a small section at a time.
I admit you don't have to apply it as often but the cost is high. I personally preferred Gtechniq g5 I feel I get more for my money.
Thanks for the feedback - we'll see how it holds up. :xyxthumbs:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.