View Full Version : Pad suggestions...
Bobbykart
11-19-2014, 11:02 AM
Time to reorder polishing pads, always used Meg's, open to suggestions
ch35iM
11-19-2014, 11:05 AM
I like the lake country CCS pads, good results.
GenesisCoupe
11-19-2014, 11:09 AM
Lake Country are great.
I always get the flat ones, and use the white ones for very light polishing, or orange for light-medium. Orange are my favorite ones as they finish well.
parttimer
11-19-2014, 11:26 AM
I'm loving hybrids.
Mike@DedicatedPerfection
11-19-2014, 12:09 PM
Which machine are you using?
tenblade2001
11-19-2014, 12:24 PM
I like the CG Hexlogic pads, but they're the only pads I've used.
Moldavite
11-19-2014, 12:41 PM
DA - microfiber pad
Flex- hybrid pad
;)
JHL88
11-19-2014, 02:18 PM
Im a fan of Buff and Shine pads of all kinds, and of course LC
tenblade2001
11-19-2014, 02:42 PM
What is the difference btwn LC and CG hexlogic?
GenesisCoupe
11-19-2014, 03:34 PM
^^ The hexlogic is a pattern difference for all i know.
Bobbykart
11-19-2014, 03:38 PM
I use the old Porter Cable, thinkin on trying the Car pro sealant quartz
EVOlved
11-19-2014, 05:34 PM
For the PC I would go with B&S pads, orange and green are my favorites.
Hopefully you already have a 5" BP for the PC if not I would definitely pick one up so you can run the 5.5" pads.
allenk4
11-19-2014, 06:32 PM
If you can wait until the new Meguiar's Thin Foam Pads come out....I would
The Guz
11-19-2014, 08:06 PM
I would go with the new Meguiar's pads. They are available at certain places online. Or you can wait until AGO gets them.
CarolinasFinestDetailing
11-19-2014, 08:40 PM
^ +1 for new Meg's foam discs. Also, Meg's MF pads.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.