NathanAuthier
08-27-2014, 09:54 AM
Hello. This may be my first post, but I've been on the Autogeek Forum's for quite a while. I currently own a 2014 Acura MDX in Crystal Black Pearl. I previously owned a 2009 Acura MDX in Silver, so I've been using all my products from that one. I've been using the following products...
Interior:
1Z Einszett Plastic Vinyl Deep Cleaner Plastik Reiniger (http://www.autogeek.net/1z-einzett-plastic-cleaner.html)
1Z Einszett Cockpit Premium Interior Plastic Cleaner (http://www.autogeek.net/1z-einzett-cockpit-premium.html)
Leather Master Strong Leather Care Kit (http://www.autogeek.net/strong-leather-cleaner-kit.html)
Exterior Washing:
1Z Einszett Anti-Insekt Bug + Tar Remover (http://www.autogeek.net/1z-einzett-bug-remover.html)
Optimum Car Wash 32 oz. (http://www.autogeek.net/optimum-car-wash.html)
Pressure Washer
2 Bucket Method
Exterior Detailing:
Pinnacle Ultra Poly Clay (http://www.autogeek.net/ultra-fine-poly-clay.html)
Wolfgang Total Swirl Remover 3.0
Wolfgang Finishing Glaze 3.0
Wolfgang Deep Gloss Paint Sealant 3.0
All of this has been used via GG 6 DA Polisher
1Z Einszett Rubber Care Stick Gummi Pflege for rubber seals
Tires:
Wolfgang Uber Wheel Kit (http://www.autogeek.net/wheel-cleaning-kit.html)
All microfibers are purchased via Autogeek and were purchased separately or came with a kit.
For the most part I've got the basics covered, but now I'm looking into specific areas and go into a little bit more detail.
For starters, my bottle of Wolfgang Paint Sealant has gone bad. Not sure what happened, but regardless of how much I shake it, it comes out extremely runny like water. With that being said, I am now looking for a replacement paint sealant. Menzerna makes a lot of good products...do they have something that could be a replacement for my WG Sealant?
Next up, I am looking for a treatment for the glass. A polish, or kit that would protect and keep up the clarity. It is a new vehicle so it shouldn't require too much work. I've been looking at the Diamondite® Glasswork System Kit for Machine Application. (http://www.autogeek.net/diglkitforma.html)
Is this overkill, or is there another method I should go with?
I am also looking for an exterior plastic trim protectant. I live in Manitoba and our winters are very cold and harsh. The vehicle as of now lives outside 24/7. I have looked at many different products but am unsure of which to go with.
Finally, for the wheels. Once again with our winters being harsh, I would like something to protect my wheels. A coating perhaps?
I apologize for this being a long post, but I am limited on time at the moment as work is extremely busy. I will be having some free time coming up, but would like to figure all this out before fall sets in.
Any questions, I can answer so if you require a bit more information please ask.
Thank you for taking the time to read!
Interior:
1Z Einszett Plastic Vinyl Deep Cleaner Plastik Reiniger (http://www.autogeek.net/1z-einzett-plastic-cleaner.html)
1Z Einszett Cockpit Premium Interior Plastic Cleaner (http://www.autogeek.net/1z-einzett-cockpit-premium.html)
Leather Master Strong Leather Care Kit (http://www.autogeek.net/strong-leather-cleaner-kit.html)
Exterior Washing:
1Z Einszett Anti-Insekt Bug + Tar Remover (http://www.autogeek.net/1z-einzett-bug-remover.html)
Optimum Car Wash 32 oz. (http://www.autogeek.net/optimum-car-wash.html)
Pressure Washer
2 Bucket Method
Exterior Detailing:
Pinnacle Ultra Poly Clay (http://www.autogeek.net/ultra-fine-poly-clay.html)
Wolfgang Total Swirl Remover 3.0
Wolfgang Finishing Glaze 3.0
Wolfgang Deep Gloss Paint Sealant 3.0
All of this has been used via GG 6 DA Polisher
1Z Einszett Rubber Care Stick Gummi Pflege for rubber seals
Tires:
Wolfgang Uber Wheel Kit (http://www.autogeek.net/wheel-cleaning-kit.html)
All microfibers are purchased via Autogeek and were purchased separately or came with a kit.
For the most part I've got the basics covered, but now I'm looking into specific areas and go into a little bit more detail.
For starters, my bottle of Wolfgang Paint Sealant has gone bad. Not sure what happened, but regardless of how much I shake it, it comes out extremely runny like water. With that being said, I am now looking for a replacement paint sealant. Menzerna makes a lot of good products...do they have something that could be a replacement for my WG Sealant?
Next up, I am looking for a treatment for the glass. A polish, or kit that would protect and keep up the clarity. It is a new vehicle so it shouldn't require too much work. I've been looking at the Diamondite® Glasswork System Kit for Machine Application. (http://www.autogeek.net/diglkitforma.html)
Is this overkill, or is there another method I should go with?
I am also looking for an exterior plastic trim protectant. I live in Manitoba and our winters are very cold and harsh. The vehicle as of now lives outside 24/7. I have looked at many different products but am unsure of which to go with.
Finally, for the wheels. Once again with our winters being harsh, I would like something to protect my wheels. A coating perhaps?
I apologize for this being a long post, but I am limited on time at the moment as work is extremely busy. I will be having some free time coming up, but would like to figure all this out before fall sets in.
Any questions, I can answer so if you require a bit more information please ask.
Thank you for taking the time to read!