Trick I discovered

[Atticus808]

not sure if anyone does this.

The water in my area is pretty hard so it can leave water spots.

While applying Rain-X on a car I was finishing up, I noticed a bunch of water spots and didn't feel like removing the Rain-X to remove the water spots then reapply again. So I took a 3" glass polishing pad and just used that to spread the Rain-X (works great as an applicator) and put a bit of pressure where water spots are and it easily removes them.

So,

- Use a 3" glass polishing pad as a Rain-X applicator
- Removes any remaining tough water spots in the process which saves lots of time.

Just thought i'd share.

[raysanni]

Great tip keep them coming

showshine

[ScottB]

If you have hard water, you might also like to add about an ounce of Optimums No-Rinse to your wash bucket. It will help with water and spotting, but you might see a small difference in foam. (not to worry its well lubricated to avoid marring)

[Atticus808]

If you have hard water, you might also like to add about an ounce of Optimums No-Rinse to your wash bucket. It will help with water and spotting, but you might see a small difference in foam. (not to worry its well lubricated to avoid marring)

interesting.

but what about when i rinse the car off?