View Full Version : Speed of PC
ben91teg
06-13-2006, 11:42 AM
What is a good speed to apply polish and glazes? I start slow like 1500 and speed up around 4 or so. Is that the correct way to do it?
Mike T
06-13-2006, 12:52 PM
Generally I'd say 1 to 3 for glazes and 4 to 6 for polishes. Depends on what your goal for that polish is.
Generally I'd say 1 to 3 for glazes and 4 to 6 for polishes. Depends on what your goal for that polish is.
What would you say as far as O.P.S..... Orbits Per Second that number 1 would be??
number 3??
number 4??
number 6??
My guess 1=1500
2=2600
3=3500
4=4500
5=5500
6=7000 I KNOW WHO CARES......:-)
ScottB
06-13-2006, 05:39 PM
highest speed 5.5-6 on PC for any polishing
3 on dial for glazes
1200-1800 max on rotaries polishing
ben91teg
06-13-2006, 09:20 PM
Ok thanks for the info.
dengood1
06-14-2006, 06:41 AM
Does anyone else notice that the PC doesn't increase speed from about 5 to 5.9, they when you hit 6 it hits a whole new speed? Almost doubles when I put in on 6.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.