PDA

View Full Version : Wool pad vs foam wool pad



surajprasade
06-30-2014, 10:10 AM
Hi,
Should I go for Lake country's purple foamed wool pad rather than conventional wool pad? Will it cut faster and beater? Specially on hard German clear coat?

David at LC Pads
06-30-2014, 10:30 AM
A typical 100% Twisted wool pads will cut a little faster than a purple foamed wool, but the Purple foamed wool does have great cutting abilities and will finish with less marring than a traditional wool pad.

Not all German vehicles have hard paint, so I would always still suggest to try the least aggressive combo first. There are German Manufactures that have ceramic clear coat, which is indeed very hard. Newer Porsche vehicles are a perfect example, as you will rarely, if ever, need a compound to correct one. They are exact opposite of some other German vehicles.

allenk4
06-30-2014, 12:33 PM
Purple Foam designed to work w DA

Twisted wool is for rotary only

Mike@DedicatedPerfection
06-30-2014, 02:45 PM
A typical 100% Twisted wool pads will cut a little faster than a purple foamed wool, but the Purple foamed wool does have great cutting abilities and will finish with less marring than a traditional wool pad.

Not all German vehicles have hard paint, so I would always still suggest to try the least aggressive combo first. There are German Manufactures that have ceramic clear coat, which is indeed very hard. Newer Porsche vehicles are a perfect example, as you will rarely, if ever, need a compound to correct one. They are exact opposite of some other German vehicles.

Well said Dave.

What are you trying to accomplish OP?

surajprasade
07-01-2014, 09:22 AM
A typical 100% Twisted wool pads will cut a little faster than a purple foamed wool, but the Purple foamed wool does have great cutting abilities and will finish with less marring than a traditional wool pad.

Not all German vehicles have hard paint, so I would always still suggest to try the least aggressive combo first. There are German Manufactures that have ceramic clear coat, which is indeed very hard. Newer Porsche vehicles are a perfect example, as you will rarely, if ever, need a compound to correct one. They are exact opposite of some other German vehicles.

Thanks David
Will this pad work with rotary buffer? My main concern is will it remove swirls on hard clear coats like Audi Merc. Bmw.
I have detail one Porsche Boxter I love the car & its paint. It was really soft paint came out great with polish & wax.

jaymz
07-01-2014, 09:29 AM
I just bought some of the TW pads for DA use and they seemed to work fine. Frankly, I still find it hard to use anything but foam pads, but these seem to work as well as the LC yellow CCS pads I normally use for badly marred paint.

Jim

RevitalizeAutoSpa
07-01-2014, 09:37 AM
LC is making a new Hybrid Foamed Wool Pad now too, much denser. I haven't tried it yet.

Honestly, I find the Meguiar's MF Xtra Cutting Discs to cut just as well, and they're a lot easier to maintain\clean.

David at LC Pads
07-01-2014, 10:03 AM
Thanks David
Will this pad work with rotary buffer? My main concern is will it remove swirls on hard clear coats like Audi Merc. Bmw.
I have detail one Porsche Boxter I love the car & its paint. It was really soft paint came out great with polish & wax.

Very Nice Boxter!

Yeah, the purple foamed wool pads work very well on a Rotary buffer.

Paul A.
07-01-2014, 10:22 AM
I love my PFW pads on my rotary for those occasions that call for it. I haven't used a yellow LC cutting pad in lieu of the PFW in probably 3 years.

surajprasade
07-02-2014, 10:54 AM
Very Nice Boxter!

Yeah, the purple foamed wool pads work very well on a Rotary buffer.

Thanks David i will definitely give it a try.

David at LC Pads
07-02-2014, 11:05 AM
Great! Make sure to follow up and tell us how you like it :xyxthumbs:

richy
07-02-2014, 02:58 PM
The Tuf Buff black wool pads are incredible. They cut better than the PFW do AND they finish down better too if worked long enough (I have a video showing how to use them). They really are the best of both worlds. I use mine with my Flex 3401 primarily but also step up to my rotary when required to do so.

Here's a shot where I have ONLY use it with Amerirocks compound. Yes, it finishes down that nicely:

http://i156.photobucket.com/albums/t12/rhowitt/Detailing%20shots/Detailing%20shots001/DSC_4352.jpg

Tacket
07-03-2014, 02:01 AM
Anyone have opinions on the CP Cool Wool pads? Just ordered a couple to try out.