PDA

View Full Version : Polishing glass help



808_detail_nut
06-07-2014, 12:58 AM
I did a waterspot removal today and ran into some problems. Not sure if you guys know of diamond magic but that's what I used with the soft scrub white sponge. This is not the first time I have used this and got great results in the past. This time I did all the windows bit when I did the back window it left some small scuff marks. I did not put too much pressure and I used a clean area of the pad.

How can I go about fixing this??? The scratches are not deep but are noticeable in the right light. Help!! And no I didn't take a picture, and yes I should have.
Sent from my SCH-I545 using AG Online

AutowerxDetailing
06-07-2014, 01:42 AM
Carpro Ceriglass + Carpro glass pads will correct scratches in glass.

Sent from my LG-LS720 using AG Online

808_detail_nut
06-07-2014, 02:16 AM
Thanks ill check it out.

Sent from my SCH-I545 using AG Online

Ckundred
06-07-2014, 12:20 PM
Carpro Ceriglass + Carpro glass pads will correct scratches in glass.

Sent from my LG-LS720 using AG Online

Would you use these products just for waterspots or would they be too harsh?

808_detail_nut
06-07-2014, 03:22 PM
I believe that you can. I scuffed the window yesterday because I think I had something in the pad I was using. Gotta check this out.

Sent from my SCH-I545 using AG Online

AutowerxDetailing
06-07-2014, 10:29 PM
Would you use these products just for waterspots or would they be too harsh?

Yeah, they work great on severely etched water spots too. You can also try CarPro Spotless which removes very stubborn spots from paint, glass, trim, etc.

Sent from my LG-LS720 using AG Online