Flyby30 prep?

[BTLew81]

If the glass is in good condition, would eraser suffice, or is ceriglass really necessary?

[richy]

I don't think it is. I use Squeaky Clean and then put 2 coats of Fly on, one immediately following the other.


Sent from my iPad using Tapatalk

[GreatAvalon]

Per Corey @ CarPro US - if no correction is needed, then use Reflect followed by 1 (or 2) wipe downs with Eraser. :xyxthumbs:

[KillaCam]

I would at least use a polish. You want the coating to bond to bare glass, and I believe polishing is the only way to achieve this.
Richy are you still seeing good results with just SC?

[richy]

I would at least use a polish. You want the coating to bond to bare glass, and I believe polishing is the only way to achieve this.
Richy are you still seeing good results with just SC?


Yes I am. Don't forget I clay first too. SC is a strong cleaner.


Sent from my iPhone 5 using Tapatalk