View Full Version : Rupes 15 / Blackfire Total Polish and Seal question?
UglyBetty
05-17-2014, 07:38 PM
Just curious, Rupes 15(maiden voyage), Rupes pads, BFTPnS. Can anyone offer recommendations for pad color and speed? Not much to correct, just a general cleanup.
FUNX650
05-17-2014, 07:50 PM
"Test Spot...Least aggressive first".
1. RUPES White finishing.....w/BTPnS...@4-6; 3-0-Done
2. RUPES Yellow polishing....w/BTPnS...@4-6; 3-0-Done
Note:
Shouldn't need much, if any, downforce.
Bob
parttimer
05-17-2014, 07:51 PM
Yellow or white, blue is pretty harsh, green a step softer still pretty stout.
Sent from my LG-E970 using Tapatalk 2
UglyBetty
05-17-2014, 08:18 PM
"Test Spot...Least aggressive first".
1. RUPES White finishing.....w/BTPnS...@4-6; 3-0-Done
2. RUPES Yellow polishing....w/BTPnS...@4-6; 3-0-Done
Note:
Shouldn't need much, if any, downforce.
Bob
3-0-done?= 3 passes?
Thanks!
FUNX650
05-17-2014, 08:31 PM
3-0-done?= 3 passes?
Thanks!
Sorry...
-When finished performing the "Test Spot" @ machine speed 4-6...
Then reduce the machine speed to 3-(2, 1, 0...Done with "Test Spot" #1).
-Inspect; confirm that this was the combo that meets your satisfaction, or not.
-If satisfied: Proceed with remainder of vehicle.
If not satisfied: Proceed with "Test Spot" #2.
Bob
Bunky
05-18-2014, 05:34 AM
You really do not need to use speed 6 with TP&S. It will probably dry out very quickly. Start at speed 4 and light pressure.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.