Paulyfe12
05-13-2014, 12:53 AM
Hello Mr. Phillips,
As you may have guessed by my obscenely large number of posts and questions, I have a lot to learn and get straight when it comes to detailing, even though I thought I knew most of what there was to know. Anyways, my question is in regards to the wolfgang paint correction system. I know that the WGTSR 3.0 is a diminishing compound/polish. But is the glaze sealant that is to be used after WGTSR a polish or a "jewelers" polish. I know the difference between the two is the abrasiveness of the compounds, polishes having around 3500 to 4000 grit. and jewelers polishes having 4500 or above. So I was just curious as to which category the WGSG Polish fits in. Even if it isn't a jewelers polish, I will probably still use it for my paint correcting, but I figured its good knowledge to have. Been doing some research with Larry Kosilla on AMMO NYC's videos and products and he carries a jewelers polish so I was just curious. And if you have any experience using AMMO NYC products please let me know how they performed.
Thanks again Mike
As you may have guessed by my obscenely large number of posts and questions, I have a lot to learn and get straight when it comes to detailing, even though I thought I knew most of what there was to know. Anyways, my question is in regards to the wolfgang paint correction system. I know that the WGTSR 3.0 is a diminishing compound/polish. But is the glaze sealant that is to be used after WGTSR a polish or a "jewelers" polish. I know the difference between the two is the abrasiveness of the compounds, polishes having around 3500 to 4000 grit. and jewelers polishes having 4500 or above. So I was just curious as to which category the WGSG Polish fits in. Even if it isn't a jewelers polish, I will probably still use it for my paint correcting, but I figured its good knowledge to have. Been doing some research with Larry Kosilla on AMMO NYC's videos and products and he carries a jewelers polish so I was just curious. And if you have any experience using AMMO NYC products please let me know how they performed.
Thanks again Mike