iron_worker
04-23-2014, 03:11 PM
Hey guys,
I took a sick day today and decided it's as good a day as any to get my bike's exhaust polished up before I put it back on.
The products I used were WG's swirl remover and #0000 steel wool by hand. I didn't take any before pics but there was lots of carbon near the tips and lots of crust and road grime everywhere. It seemed to do the trick quite nicely. I thought about throwing some LSP on there but I don't think it would take the heat. I've heard some coatings can but I haven't experimented with coatings yet.
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2014-04-23/20140423_112810_zps25c89e5c.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2014-04-23/20140423_112810_zps25c89e5c.jpg.html)
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2014-04-23/20140423_112846_zps5ea5a6a6.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2014-04-23/20140423_112846_zps5ea5a6a6.jpg.html)
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2014-04-23/20140423_133402_zpsb7d38aab.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2014-04-23/20140423_133402_zpsb7d38aab.jpg.html)
And the bike it's off of (1974 Honda CB750):
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2013-07-14/IMG_2362_zps6a037cf3.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2013-07-14/IMG_2362_zps6a037cf3.jpg.html)
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2013-08-11/20130811_105427_zpsed81e8c0.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2013-08-11/20130811_105427_zpsed81e8c0.jpg.html)
I did a restoration on it the winter before last but had the engine out again this winter due to a small oil leak. I'm trying to get it back together to get riding but winter has been holding on soooooo long here. Arg! Now it seems we're in for a wet spring.
Oh well. Hopefully you enjoy the pics.
IW
I took a sick day today and decided it's as good a day as any to get my bike's exhaust polished up before I put it back on.
The products I used were WG's swirl remover and #0000 steel wool by hand. I didn't take any before pics but there was lots of carbon near the tips and lots of crust and road grime everywhere. It seemed to do the trick quite nicely. I thought about throwing some LSP on there but I don't think it would take the heat. I've heard some coatings can but I haven't experimented with coatings yet.
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2014-04-23/20140423_112810_zps25c89e5c.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2014-04-23/20140423_112810_zps25c89e5c.jpg.html)
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2014-04-23/20140423_112846_zps5ea5a6a6.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2014-04-23/20140423_112846_zps5ea5a6a6.jpg.html)
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2014-04-23/20140423_133402_zpsb7d38aab.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2014-04-23/20140423_133402_zpsb7d38aab.jpg.html)
And the bike it's off of (1974 Honda CB750):
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2013-07-14/IMG_2362_zps6a037cf3.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2013-07-14/IMG_2362_zps6a037cf3.jpg.html)
http://i1070.photobucket.com/albums/u485/iron_worker/CB750/2013-08-11/20130811_105427_zpsed81e8c0.jpg (http://s1070.photobucket.com/user/iron_worker/media/CB750/2013-08-11/20130811_105427_zpsed81e8c0.jpg.html)
I did a restoration on it the winter before last but had the engine out again this winter due to a small oil leak. I'm trying to get it back together to get riding but winter has been holding on soooooo long here. Arg! Now it seems we're in for a wet spring.
Oh well. Hopefully you enjoy the pics.
IW