Meguiars DA polisher not working

[Cliffy]

I just tried to use my Meguiars DA polisher since last November. It will not come on at all. Any suggestions why this might be?

[Coopers ST]

unplugged or the breaker on the outlet tripped?

[Cliffy]

unplugged or the breaker on the outlet tripped?

Nope! Checked multiple outlets

[goldenlight]

1) Check to see is brush heads are worn. There under the flat head plastic screws on the side of the machine.

2)Try bending the cord if it power on bending the cord at the end, you just need to replaced the cord. YOu can get this from your big box store..

[Shane731]

I used to have one and it quit working on me - turns out it was a power cord failure. If you are handyman-minded you might be able to fix it.

http://www.autogeekonline.net/forum/off-topic/41766-g110v2-died.html

http://www.autogeekonline.net/forum/how-articles/42550-g110v2-cord-replacement-tutorial-w-photos.html

[Mike@DedicatedPerfection]

I used to have one and it quit working on me - turns out it was a power cord failure. If you are handyman-minded you might be able to fix it.

http://www.autogeekonline.net/forum/off-topic/41766-g110v2-died.html

http://www.autogeekonline.net/forum/how-articles/42550-g110v2-cord-replacement-tutorial-w-photos.html

Agreed.

My cord failed as well. Turn the polisher on and move the cord around. If it turns on and off the cord is the problem.

[Cliffy]

I tried moving the cord around. All I get is a light buzzing noise. First I'll try the brush heads. If that doesn't work then I'll try a new power cord. Thx everyone!!!