1998 VMAX correction

[kirkatizer]

Did a paint correction today on a 1998 Yamaha VMAX. The bike is garage kept and fairly clean. So I wiped down the paint with Meg's last touch Detailer. I then Clayed the painted surfaces using a Nanoskin fine grade clay rag.

After the paint was free of contaminants I started with a 3" Lake County orange cutting pad using M101 Foam Cut Compound with my GG3. After about 3 applications the paint was swirl free!

I then changed pads to a 3" Lake County blue polishing pad using M205 Ultra Finishing Polish to bring out the gloss and color definition.

I sealed my work with Colinite 845 using a microfiber applicator. This correction brought the depth and color of the paint back not to mention the flake. :xyxthumbs:

https://scontent-a-iad.xx.fbcdn.net/hphotos-ash3/t1.0-9/10150601_728897353817436_1110451474_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/10171280_728897347150770_1229813554_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/1976886_728897620484076_974137719_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/10006258_728897640484074_1223495755_n.jpg

Forgot to take a before of the tail. :mad:
https://scontent-b-iad.xx.fbcdn.net/hphotos-ash4/t1.0-9/1509257_728897660484072_541107502_n.jpg

[fengstang]

Color looks killer. Any pics of thr whole bike?

[jamesboyy]

Wow yet again you did a amazing job you can tell your a dedicated to your work great job

[kirkatizer]

Thanks guys! I'll see if I can find one.