First time ever polishing yesrerday

[muscleman]

So yesterday was my first time ever polishing ... I used pc 7424xp with a white lake country smart pad and m205 i was pretty happy with the results but just wanted to know ofany advice about technique or pressure to apply ...like i said i did a good job but then again want to make sure I'm doing the best i can.

Sent from my LGL35G using AG Online

[nezff]

So yesterday was my first time ever polishing ... I used pc 7424xp with a white lake country smart pad and m205 i was pretty happy with the results but just wanted to know ofany advice about technique or pressure to apply ...like i said i did a good job but then again want to make sure I'm doing the best i can.

Sent from my LGL35G using AG Online

Arm speed and pressure plus pad polish combo are just a few things that result in good finishes. Speed of the machine, pressure, and of course what paint you are working on.

[muscleman]

Pressure is the one thing I'm not certain about and how many passes to make and what you consider a pass ... other than that i think I'm good any advice on those subjects ?

Sent from my LGL35G using AG Online

[cleanmycorolla]

You should watch mikes videos. He goes over section passes and arm speed and pressure. It's all here in the forum in how to.

[muscleman]

Ok thanks ill check it out

Sent from my LGL35G using AG Online

[BobbyG]

Some great information by Mike Phillips!


Sectional Pass With a DA Polisher (http://www.autogeekonline.net/forum/show-car-garage-how-videos/24074-show-car-garage-video-how-do-section-pass-when-machine-polishing-da-polisher.html)
Removing Swirls (http://www.autogeekonline.net/forum/tricks-tips-techniques/20021-definitive-how-article-removing-swirls-scratches-water-spots-using-porter-cable-7424xp-g110v2-griot-s-garage-polisher.html)
DA Trouble Shooting Guide (http://www.autogeekonline.net/forum/auto-detailing-101/37769-da-polisher-trouble-shooting-guide.html)
Waxing With a DA Polisher (http://www.autogeekonline.net/forum/pinnacle-wax/28651-how-machine-apply-wax-using-da-polisher.html)
How to prime a foam pad when using a DA Polisher (http://www.autogeekonline.net/forum/how-articles/35292-how-prime-foam-pad-when-using-da-polisher.html)
DA Polisher Articles - Help for Newbies to Machine Polishing (http://www.autogeekonline.net/forum/questions-about-porter-cable-7424xp-7424-7336-griot-s-meguiar-s-dual-action-polishers/38399-da-polisher-articles-help-newbies-machine-polishing.html)
How to MAXIMIZE your DA Polisher (http://www.autogeekonline.net/forum/how-articles/27166-how-maximize-your-da-polisher.html)

[Kamakaz1961]

Hey Muscleman Mike has some great videos and there is another guy that has real funny videos and gets real detailed in how to use the PC 7424 XP. On you tube he is known as the Junkman2000. His videos are extremely detailed and he makes watching them fun. Mikes videos are great too. Either way you can't go wrong watching any of them

[brondondolon]

You should watch mikes videos. He goes over section passes and arm speed and pressure. It's all here in the forum in how to.

+1

Sent from my HTC6435LVW using AG Online