View Full Version : XMT 360 or XMT Fine Swirl Remover + glaze?
makdaddy626
07-14-2007, 12:19 PM
New truck, Toyota Tacoma in Black Sand Pearl, very minor swirling from the factory. Which would be best?
XMT 360 followed by WGDGPS
or
XMT 1 followed by the XMT carnuba glaze followed by XMT 180
or
something else?
wytstang
07-14-2007, 12:55 PM
I have no experience with the XMT line so I'll sugest what I do have experience with. Optimum Poish with a light cutting pad should handle very minor swirls you describe. I would follow that with Klasse all-in-one to remove any oils left behind, then top that with Pinnacle Sig series II to bring the pearl out. If you want to add a glaze for the added wet look I'm a huge fan of Clearkotes Red Machine Glaze, then top it with Sig II. You'll have to get Clearkote from another vendor as AG doesn't offer it anymore.
XMT 360 with cutting pad then WGDGPS.
Mike T
07-14-2007, 02:40 PM
Out of the two, 360 plus WGDGPS.
ehuth1
07-14-2007, 03:21 PM
I like the Poorboys Polish W/ Sealant then you can top with XMT180 or Pinnacle Souveran Paste :) You get alittle more flake poppage from Poorboys
, but both have excellent depth and slickness. This truck is Black Sand Pearl!
Here is 360/180 topped
http://i79.photobucket.com/albums/j129/ehuth1/100_1700.jpg
http://i79.photobucket.com/albums/j129/ehuth1/CanonRebel027.jpg
Here is Poorboys PWS/Pinnacle Souveran Paste
http://i79.photobucket.com/albums/j129/ehuth1/zoomzoomapril07013.jpg
http://i79.photobucket.com/albums/j129/ehuth1/zoomzoomapril07014.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.