tornador foam gun

[1carguy]

I am considering a Tornador foaming gun. Have several questions.

The gun would be used for washing my motorhome. I have an air supply on the motorhome that puts out up to 125psi. I also have an on board electric pressure washer with spot free DI tanks.

Questions:

1. Would this work with the psi that I have?
2. With the air hose attached I am concerned about the bottle sitting flat on the ground when I am brushing or rinsing. If it will not site flat, but falls to the side I am concerned about product coming out while laying on it's side. Thoughts?
3. Is this an efficient use of chemical without diluting with water? Would a foamer attached to my pressure washer be more efficient?
4. Any other thoughts about this item and my application?

Thanks

[HateSwirls]

Check your cfm.
I have a 150psi compressor but the cfm is only 3.4 which isn't enough to run the gun your looking at.
I checked into it myself.