PDA

View Full Version : Correction on 08 C6 vette with Matte stripes



Pages : [1] 2

CodySanborn
01-25-2014, 04:13 PM
I am going to be doing a correction with Fg400 and P085RD on a black vette.. Question is he has 2 small stripes along the hood and the decklid. DO i tape them off? I would think hitting them with a wax or DA would ruin or fade the stripes or pull the edges up?

Im thinking maybe tape them off and spray with the Aero 303?

thoughts..help is greatly appreciated

Cody

CodySanborn
01-25-2014, 04:22 PM
or my Adams VRT

CodySanborn
01-26-2014, 12:41 AM
Bump

Sent from my HTC6500LVW using Tapatalk

AutowerxDetailing
01-26-2014, 12:56 AM
If they are matte finish you don't want to polish them.

Sent from my N9810 using AG Online

CodySanborn
01-26-2014, 02:11 AM
If they are matte finish you don't want to polish them.

Sent from my N9810 using AG Online

okay, thanks for the response.
So can I add some sort of protection? Adams youtube channel has them adding VRT

Stampe
01-26-2014, 05:22 AM
What products are you gonna use to protect the vette?

CodySanborn
01-26-2014, 05:38 AM
What products are you gonna use to protect the vette?

Cg citrus Wash out of my bunny k foam gun.
Iron-x
Clay with adams spray
Fg400 griots da.
Po85rd
Sonax net sheild
Petes 53

Sent from my HTC6500LVW using Tapatalk

pikiki
01-26-2014, 09:28 AM
careful with those stripes even a DA can damage them if you are not carefully tape it. If you are going to corrected you will go over must areas a few passes so if 100% safer if you take your time and tape it down those stripes.

Andr3wilson
01-26-2014, 10:20 AM
Do not go anywhere near the stripes with petes 53. That stuff with stain them.

ExoticAutoDetai
01-26-2014, 11:58 AM
I think chemical guys now carries a product for matte finish. If I'm not mistaken.

Sent with my Note 2, from Planet Namek.

HateSwirls
01-26-2014, 01:35 PM
I Always tape the stripes and stay away from them.
Good practice.

CodySanborn
01-26-2014, 03:19 PM
So i can use Adams vrt

Sent from my HTC6500LVW using Tapatalk

FUNX650
01-26-2014, 04:03 PM
I think chemical guys now carries a product for matte finish. If I'm not mistaken.

There's also matte products offered by:
Nanolex, Swissvax, and Dr. Beasley.

Bob

ExoticAutoDetai
01-26-2014, 04:40 PM
There's also matte products offered by:
Nanolex, Swissvax, and Dr. Beasley.

Bob

Was not aware of this, good to know.

Sent with my Note 2, from Planet Namek.

Stampe
01-27-2014, 02:29 AM
Cg citrus Wash out of my bunny k foam gun.
Iron-x
Clay with adams spray
Fg400 griots da.
Po85rd
Sonax net sheild
Petes 53

Sent from my HTC6500LVW using Tapatalk


I dont know about that product, but i know that Opti-Coat can be used on matte finishes. :)