Help with Duragloss Process

[turbokick]

I am planning to try Duragloss in a dark grey metallic car. It is in relatively new condition, maintained with Colli 845 / OCW.
Minor swirl marks are here and there.

My plan is:

Wash - 901
Claybar
Clean with 652
Seal with 105 (may be with 601)


Does it sound good? All application by hand.

My question is about 652. Is it the right stuff to use? I need to strip off Colli and OCW residues. Is it usable by hand?

Any better suggestions?

[530inv]

Looks like you will be fine with that process. I am not sure how much swirl removing ability you will have doing it by hand, but at least the old wax should be removed to prep for the 105.

[turbokick]

Thanks @530inv. Swirl removal is secondary, my primary objective is to strip off the old wax/sealant. Hope 652 by hand would that for me in addition to claybar.

[530inv]

No problem at all. You can look into something like this Griot's Garage Paint Prep, Griots Paint Cleaner, Prewax cleaner (http://www.autogeek.net/griots-paint-prep.html) for the future if you want to reduce some steps.