Going to make a purchase need to doublecheck my process...

[denali33]

Can you all doublecheck what I am going to purchase so I am purchasing the right stuff.

1.Wash the car

2.Apply the prewax.."Wolfgang Paintwork Polish Enhancer using the 1 CCS 6.5 Inch Gray Finishing Pad, is this the correct pad?

3. Apply the 8 oz. Wolfgang Total Swirl Remover 3.0" using the 1 CCS 6.5 Inch Orange Light Cutting Pad" I will not be applying this to the whole vehicle just suspect spots.

4. Finish it off with the Wolfgang Deep Gloss Paint Sealant 3.0 and use this Finessing pad to apply "http://www.autogeek.net/blue-5-5inch-ccs-buffing-pad.html"

I am getting the Wolfgang Duo & Porter Cable 7424XP FREE BONUS (http://www.autogeek.net/wolfgang-porter-cable-combo.html) kit and then piecing the sealant and prewax combo individually thoughts?

Sound like a gameplan for a shiny car!?

[Bill1234]

Are you using 2 buckets and a grit guard? You should clay first before wax

[swanicyouth]

You want to go TSR -> WG Finishing Glaze -> sealant -> +/- wax. No PPE required is required if your polishing.

[TheRosser]

I would use a white ccs pad for pre wax cleaners. That's what Autogeek told me when I called and asked some questions before ordering.

But it'll go

Wash
Clay
Swirl remover
Pre wax cleanser
Sealant

And if you want a deeper, wet look, top with a carnuba wax. But that's just an extra step that's not needed, but looks nice when done.

Happy detailing!

[denali33]

called up autogeek what an exceptional customer support line. ended up going full Wolfgang line. tech walked me through about 30 minutes worth of guidance amazing. Everything is on the way

recommended
car wash
clay
car wash
finishing glaze
then sealant

Sent from my SAMSUNG-SGH-I537 using AG Online