WDGPS dwell time?

[Just02896]

I've corrected the paint on my plow truck and decided to seal with WDGPS. How long do you guys let it dwell before buffing off?

[Finemess]

Per the website.

4.Once the vehicle is covered, wait 30-45 minutes before buffing. Use a microfiber towel or a microfiber bonnet on your polisher.

I waited a good half hour.

[Just02896]

Per the website.

4.Once the vehicle is covered, wait 30-45 minutes before buffing. Use a microfiber towel or a microfiber bonnet on your polisher.

I waited a good half hour.

I was just curious to hear the general concensus. I've read that some guys leave it on for 30 minutes and some leave it on overnight.

[jgibson2980]

Per the website.

4.Once the vehicle is covered, wait 30-45 minutes before buffing. Use a microfiber towel or a microfiber bonnet on your polisher.

I waited a good half hour.

Agree

Sent from my SPH-L710 using AG Online

[arisking]

30-45 minutes as stated, depending on humidity etc.

Also, swipe test and you'll know when it's done.

[Jpatchley]

30-45 minutes as stated, depending on humidity etc.

Also, swipe test and you'll know when it's done.

Plus 1 on the swipe test.

[jankerson]

I would say do the swipe test...

I wait an hour or more usually.

[swanicyouth]

20 mins is sufficient. But there are a lot of factors including temps and how thin you apply it.

[HateSwirls]

I wait ome hour, the longer you wait the easier I find it can be removed.

[Just02896]

Thanks fellas!

[jankerson]

I wait ome hour, the longer you wait the easier I find it can be removed.

Yep, an hour or more it just falls off for the most part.. :D