ramos617
12-20-2013, 06:44 AM
I just got done restoring a set of headlights for my car, they came out better than i could have imagined and I'm really happy about how they look.
I have applied opti-lens onto the headlights already for that UV protection, I also have some wolfgang 3.0 sealant on the shelf.
Would it be a bad idea to apply some sealant over the optilens for further protection?
Would the sealant remove or affect the application of optilens?
The only reason i ask is because i need the headlights to last as long as possible because they are obsolete, there is no aftermarket availability, and they are expensive when found even in decent condition.
I bought these headlights with the plan to restore them and here are the results of 600, 1000, 1500, 2000, and 3000 grit sandpaper followed by meguiars m105 w/cutting pad and m205 w/polishing pad
They were actually a little worst than they look in the picture, this picture is after I cleaned them my hand with simple green and a towel
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0298_zps3596b162.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0298_zps3596b162.jpg.html)
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0299_zps1ed458b3.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0299_zps1ed458b3.jpg.html)
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0300_zpsc1683a5e.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0300_zpsc1683a5e.jpg.html)
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0301_zps45263479.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0301_zps45263479.jpg.html)
I have applied opti-lens onto the headlights already for that UV protection, I also have some wolfgang 3.0 sealant on the shelf.
Would it be a bad idea to apply some sealant over the optilens for further protection?
Would the sealant remove or affect the application of optilens?
The only reason i ask is because i need the headlights to last as long as possible because they are obsolete, there is no aftermarket availability, and they are expensive when found even in decent condition.
I bought these headlights with the plan to restore them and here are the results of 600, 1000, 1500, 2000, and 3000 grit sandpaper followed by meguiars m105 w/cutting pad and m205 w/polishing pad
They were actually a little worst than they look in the picture, this picture is after I cleaned them my hand with simple green and a towel
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0298_zps3596b162.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0298_zps3596b162.jpg.html)
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0299_zps1ed458b3.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0299_zps1ed458b3.jpg.html)
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0300_zpsc1683a5e.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0300_zpsc1683a5e.jpg.html)
http://i245.photobucket.com/albums/gg74/nukkah617/T-Bird/IMAG0301_zps45263479.jpg (http://s245.photobucket.com/user/nukkah617/media/T-Bird/IMAG0301_zps45263479.jpg.html)