Stopping In To Say Hello..

[will2drive]

Stoppin in for a quick hello to get started here. In the past I was a lot more active in the hands-on detailing with several of my past cars. Just recently my wife and I picked up some new cars and I was re-thinking getting minimally involved in car care again. I suffered some heavy duty health setback a few years back which kinda renders nerve deficits in my left side to include arm and hand. Some things I cannot do anymore and I'll pay to have them done like the clay bar however, I thought I could get by using a easier to use polisher like the Rupes 15es and some polish and paint sealant using the Klauss products. I've always been a fan of Pinnacle Souveran so I picked up the Forum Favorite kit along with the ultra poly clay which I will sub out that work. Should have the Rupes this week and positive thoughts towards getting the job done. My paint is just a few months old and is a white orchid pearl color which will be less labor intensive than my black vehicles in the past. Plus it will be garage kept most of the time slowing down the contaminant exposure over time. Anyway just touching base as I may have a few questions upcoming. I've done several hours of reading here and look forwards some future advice from some of the experienced with these new products!

[Mike Phillips]

Welcome to AutogeekOnline!


:welcome:

[jgibson2980]

Welcome to auto geek

Sent from my SPH-L710 using AG Online

[hernandez.art13]

Hello :xyxthumbs:

As far as claying goes. The NanoSkin Auto Scrub will make claying so much quicker and easier.

23737

[Evan.J]

Welcome to the forum!

[Klasse Act]

Welcome to AG!

Sent from my SPH-M930 using AG Online

[Dr_Pain]

:welcome:

[TopThatDetail]

Welcome to AGO!

[Meghan]

:welcome:

[HateSwirls]

Good luck and welcome here.
I have respect for people as yourself that continue to do what they love even though it may not be easy.
I'm sort of in the same boat but I push on, I do what I can and that's the best I can do.
Do your best and I'm sure you'll be very happy:)

All the luck to you man :)

[Chris@AutoCleanse]

Welcome to the GEEK.

[Mike@DedicatedPerfection]

Hi Will, welcome to AGO.

[Pureshine]

Welcome to AGO :)

[Killerwaxxshawn]

Welcome to the forum

[will2drive]

Hi folks, and thanks for the kind welcome! And thanks for the tip about the claying, I'll look into that. I'll let you know how things go for me. According to Auto Geek I should be receiving the machine today...Boy that was fast, ordered yesterday and shipped out. Of course I'm not all that far down the state from Stuart, Fl. Best Regards, Will G.