Quick question on sealant curing time if the weather get nasty

[keepitclean]

Looks like I will have a car to do this week and I'll be able to detail it in doors. I plan on a one step process and look to seal it with Klasse AIO. This is a tough last step product which will have some durability with the car sitting outside all the time.

So....how long can I wait before Klasse AIO needs to seal/cure and come out of the garage. Wednesday is suppose to be a little wet and dreary and just worried about exporting the car to moisture too early.

Thanks..

[FUNX650]

From my use of KAIO...
It doesn't need to cure, per se...especially if you immediately follow-up by applying
the other half of the "Klasse Twins": Klasse High Gloss Sealant (KHGSG).

That's when curing becomes more pertinent, IMO.
That's usually a 12 hours (minimum) time period for KHGSG.

KAIO seems to lack the toughness and durability of a
more dedicated LSP like its complimentary-"Twin": KHGSG.

But:
If you're not going to immediately apply KHGSG...
My advice is:
Why not keep the KAIO as dry as possible, for as long as possible.
Treat it as if it was KHGSG.

:)

Bob

[jamesboyy]

Once applyed to the paint work wait atleast 45 mins to buff off it wont be fully cured until 8 to 24 hours depending upon your enviroment if you have trouble removing product just sprit two spray of water...good luck