Show Truck Continued

[Excessive Detail]

Hey guyz, I promised some detail pics of the show truck I had posted a while back. This was no easy detail, the truck was still being worked on and most of it was above my head. Still I managed and it came out pretty good. I only did the paint, cause the truck wasn't finished till the next day. I don't have pics of the finished truck, but I will have them soon.

Process:

Since the truck was still new I figured I'd use a light combo, but boy as I fooled, as soon as I put some light on it all the scratches and scuffs came out, which was somewhat understandable being that its been in a shop for the last few months and people touched on a daily basis. I managed to get about 90% out.

I started with OPT. Polish and green edge pad, then followed with OPT. Polish, which is my new favorite line of polish, and a orange edge pad, which worked out great till my green edge pad fell apart and I managed to make a blue edge pad explode while attempting to use it as the final polish, that why I wound up using the orange pad. I seem to have a problem with that, luckly I was able to finish it with the orange pad, took a little longer, but it came out perfect. I sealed it with WG and topped it with Pinn. Soveran, amazing. It looked good sitting on the rack, hope it looked good at the show. Here are the pictures.

Before:

http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010016.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010012.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010015-1.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010014.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010008-1.jpg

Getting Ready

http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010030.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010033.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010034.jpg

After:

http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010039.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010038.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010011-1.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010037.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010021.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010018-1.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010028.jpg

[Jimmie]

Now that is a mirror. Wow. Good work.

[Excessive Detail]

More Pictures;
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010029.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010004-1.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010002-1.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010001.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010005-1.jpg

The blue tape on the fenders is the line were the fenders had to be cut for the fender flares, kinda sad to have to cut a brand new truck, but it will look good when its done.

Here is a teaser pics of what it might look like when its finally done. 17" air ride lift and 54" TSL Boggers on 20" Jesse James rims.

http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010013.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010017.jpg

http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010015-2.jpg


Damaged pads, I almost cried.

http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010071.jpg
http://i103.photobucket.com/albums/m133/ExcessiveDetail/P1010066.jpg

I should have pics of the truck from the show soon, I'll post them as soon as I get it.

[supercharged]

That's a huge monster truck!!!

[AUdakota]

I think with a few more inches of lift I could throw those 54's on my truck.

[Excessive Detail]

I think with a few more inches of lift I could throw those 54's on my truck.
I say go for it, I think each tire cost a little under $1,000 and the lift was somewhere in the $30,000 range no lie its expensive.

[sparkie]

Wow bro, that thing is huge! Awesome job!:applause: When you going to get some gel on them tires?

[Excessive Detail]

Wow bro, that thing is huge! Awesome job!:applause: When you going to get some gel on them tires?

I figure that I'll have to use some type of foam, I actually left it up to the guy who ownes it to dress the tires, it would cost me a fortune to dress them.

[Gnarboots11]

Hey, where is that shop located?

[AUdakota]

I say go for it, I think each tire cost a little under $1,000 and the lift was somewhere in the $30,000 range no lie its expensive.



I would need about 25,000 in axles too, them puppies aint light.

[DavidJ021]

Wow must've been a beast to detail. Good job.

[Truls]

Looking flawless, def a head turner at the show...