pagaz
11-15-2013, 02:56 PM
hello,
i detailing the hood.
The processe :
1. Washing the hood + drying
2. Clay
3. Polish:
Compound= ultimate compound + yellow pad meguiras
Finish = ultimate polish + black pad meguiras
4.Chemical guys black light
5.Dodo (http://www.detailingworld.co.uk/forum/autolink.php?id=18&forumid=187&script=showthread) juice acrylic spritz
picture before:
http://imageshack.us/a/img51/5993/img0034mn.jpg
after :
http://imageshack.us/a/img196/4593/4do2.jpg
http://imageshack.us/a/img203/8949/m0w8.jpg
http://imageshack.us/a/img822/2131/s8k9.jpg
http://imageshack.us/a/img10/1334/hv40.jpg
http://imageshack.us/a/img20/3017/h6w3.jpg
http://imageshack.us/a/img208/7931/sk4l.jpg
this is how i working :
UC + yellow pad 2.0 meguiars - 3 dots on the pad , section working small , each section 4 pasess ( left to right +up and down 4 times ) ,
first i sperding the UC with speed 1
then i working on the section with speed 5 + very slow arm + preesure
Ultimate Polish+black pad 2.0 meguiars - 3 dots on the pad , working on small section , 4 pasess ( left to right +up and down 4 times ) ,
first sperding the UP on speed 1
then i working on speed 4 with light preesure
What u think ?
thanks
i detailing the hood.
The processe :
1. Washing the hood + drying
2. Clay
3. Polish:
Compound= ultimate compound + yellow pad meguiras
Finish = ultimate polish + black pad meguiras
4.Chemical guys black light
5.Dodo (http://www.detailingworld.co.uk/forum/autolink.php?id=18&forumid=187&script=showthread) juice acrylic spritz
picture before:
http://imageshack.us/a/img51/5993/img0034mn.jpg
after :
http://imageshack.us/a/img196/4593/4do2.jpg
http://imageshack.us/a/img203/8949/m0w8.jpg
http://imageshack.us/a/img822/2131/s8k9.jpg
http://imageshack.us/a/img10/1334/hv40.jpg
http://imageshack.us/a/img20/3017/h6w3.jpg
http://imageshack.us/a/img208/7931/sk4l.jpg
this is how i working :
UC + yellow pad 2.0 meguiars - 3 dots on the pad , section working small , each section 4 pasess ( left to right +up and down 4 times ) ,
first i sperding the UC with speed 1
then i working on the section with speed 5 + very slow arm + preesure
Ultimate Polish+black pad 2.0 meguiars - 3 dots on the pad , working on small section , 4 pasess ( left to right +up and down 4 times ) ,
first sperding the UP on speed 1
then i working on speed 4 with light preesure
What u think ?
thanks