Black label

[BrianMcLeod]

How should I apply black label sealant and how long to let it Sit

[MarkD51]

How should I apply black label sealant and how long to let it Sit

I would think the general rule of thumb would apply, to all wipe on, wipe off synthetics.
Apply, and apply as thin as humanely possible, insure complete coverage, let sit for 35-45 minutes in as clean as an enviornment that you can find (meaning don't apply such products during a Typhoon) Then wipe off, and don't mess with it, don't get the vehicle wet, or apply other products for a minimum of 8-12 hours.

Just good common sense is all, let these products "live" a little bit before you do anything aggressive to them like water, or other products with solvents, chemicals, etc.

Like good Italian Salami, you have to let it "cure" LOL
Mark

[Nick McKees37]

Apply a thin coat and let it dry to a haze for 5-10 min. Removal should be effortless.

Keep away from water and moisture for a couple hours.

[RandyD]

Nick is right. It takes less effort than any sealant or wax I have ever used. BFWD sealant is pretty easy to remove but Black Label makes BFWD sealant seem hard.