Help please Headlights by PC

[BrianMcLeod]

I sanded my headlight by hand and today I sanded it by PC and seems like it made it worse here is what I did
500 grit dry

800 grit dry

1000dry

1500 wet

3000 wet

Compound with m105

Polish with m205

And opti Lens

What speed do y'all use what did I do wrong

[Flash Gordon]

I sand my headlights wet in all stages, but I don't think that would make much difference

Are they hazy or scratchy looking?

[BrianMcLeod]

More hazy I would say

[Flash Gordon]

More hazy I would say

I say go at it again. This time apply more pressure or use a drill

[BrianMcLeod]

2283122832they look better in pictures

[BrianMcLeod]

22833

[Evan.J]

Looks like your not removing all the sanding marks.

What pad and size of pad are you using with M105 and what speed?

[Flash Gordon]

2283122832they look better in pictures

Everything but my face looks better in pictures

[BrianMcLeod]

Orange pad with flex 6inch

[BrianMcLeod]

Everything but my face looks better in pictures

Haha same here

[BrianMcLeod]

Looks like your not removing all the sanding marks.

What pad and size of pad are you using with M105 and what speed?

5 speed

[Flash Gordon]

5 speed

Drop it to 3

[BrianMcLeod]

Ok I thought I wasn't going fast enough so 3 on flex ?

[Vegas Transplant]

Did you spend enough time at each grit to remove the previous grit's sanding marks?
Doesn't seem to be any uniformity-especially in the center of the yellow reflector.

I prefer wetsanding plastic because I can see uniformity, and when to switch to next grit as I spritz on the lube to remove the slurry.

http://www.autogeekonline.net/gallery/data/1838/hdlts_re4.png (http://www.autogeekonline.net/gallery/showphoto.php/photo/64408)

[BrianMcLeod]

I followed what y'all said to do and guess what happen 22997