The Shine Shop Maryland

[Rick72]

I've just returned home for having my car detailed and coated with CQ finest.
Mike did a fantastic job! After leaving I pulled into a bank parking lot around the corner and gave it a thorough once twice and third look over. He didn't miss a thing - I'll post some pics when I get a chance.
Thank you Mike and Layna !

[Rick72]

Mike, so this isn't purely an endorsement and I feel strongly about sharing knowledge please post the process you did to prep for the coating. This will allow other pros to know what you've done.
Thanks again!

[Mike lambert]

Well, I was very lucky to receive a car that was very well maintained! This makes it easier to look like I know what I am doing!
Just basic car wash scratches,a few rids,nothing major. I really wanted the car as close to flawless as we could get,as the silver would look really good with finest.
We started with fg400 on a b/s cutting pad, did some spots with a micro pad and were happy. Finished with reflect on a white rupes pad.
Coated all paint , jambs, wheels and glass with finest. The ONLY coating we apply. Interior was very well maintained and received carpro f/l on all surfaces. Engine and trim was done with adams svrt milk. Tires with ammo mud.

[Mike lambert]

http://i1283.photobucket.com/albums/a555/theshineshop/d78962f0fb1e75fee96e86b3d2c9c3a7_zpsf1d94b53.jpght tp://i1283.photobucket.com/albums/a555/theshineshop/0b203eb1808662baf591e5b632b677e1_zps816e89e3.jpg

[Scott@IncrediblyDetailed]

Nice. I like the new mazdas, they are going in the right direction.

[Rick72]

Thanks for posting the pics. It's looks even better today! Engine bay looks as good as the paint !
SVRT appears to be some good stuff and that's with a 1:1 ratio?

[Mike lambert]

Thank you!
Yes , maybe a little less, after it sits and I have finished all but the coating or sealant, I wipe it down.
Thanks again!