lhuynh1210
10-14-2013, 01:03 AM
I've been a lurker some time now. But i've been detailing for about a year and half now. I started off with Megs UC, UP, and NXT 2.0. But have gradually moved up to Megs 105/205 Combo with Collinite 845 which has been my go to combo for the last 6 months on various cars. Until i got on AGO..... I finally got the chance to work on my car with the D300/105 + MF Pad. I just picked up Sonax Perfect Finish which I must say is absolutely amazing and worth the pretty penny. I then finally bit the bullet and bought some opticoat. But heres my write up!
Exterior:
Meguiars APC
Meguiars D300/M105
Sonax Perfect Finish
Mild Clay
Opti Coat 2.0
Opti Tire Gel
MF/Black pads
Various Microfibers
I dont have very many before shots, but here is what my car looked like Wednesday after it rained some.
http://farm6.staticflickr.com/5487/10263036784_b58d709b9c_b.jpg (http://www.flickr.com/photos/94325214@N02/10263036784/)
http://farm4.staticflickr.com/3679/10263127566_c7a84ec971_b.jpg (http://www.flickr.com/photos/94325214@N02/10263127566/)
I started to actually begin correcting, but only finished the hood/fender sealing it up with BFWD to see if I liked the look. It was okay, but I wanted more. So here begins the real write up.
Washed with Dawn Soap to make sure all old wax was gone. I knew that the sealant would remain, but I knew i was going to polish it off anyways. Heres how it sat after a wash.
Clean Right?.....
http://farm4.staticflickr.com/3714/10260317946_9897840d4f_b.jpg (http://www.flickr.com/photos/94325214@N02/10260317946/)
Began claying, and this came off half the trunk
http://farm6.staticflickr.com/5483/10263600633_c3dc39f319_b.jpg (http://www.flickr.com/photos/94325214@N02/10263600633/)
Swirls and marring from the mild clay
http://farm3.staticflickr.com/2829/10260217544_d1b8843c8e_b.jpg (http://www.flickr.com/photos/94325214@N02/10260217544/)
http://farm4.staticflickr.com/3739/10260322385_7c5ab9ecff_b.jpg (http://www.flickr.com/photos/94325214@N02/10260322385/)
Overall the paint wasnt too bad. This was a shot of the fender I corrected about a month ago.
http://farm4.staticflickr.com/3768/10260315135_5065b4e234_b.jpg (http://www.flickr.com/photos/94325214@N02/10260315135/)
Etchings over the hood from the recent rain/dirt stains. I thought BFWD wouldve held up a bit better. Unless I didnt wash thoroughly enough.
http://farm4.staticflickr.com/3754/10260199784_6f1b703ed4_b.jpg (http://www.flickr.com/photos/94325214@N02/10260199784/)
http://farm6.staticflickr.com/5333/10260312165_16e0f59989_b.jpg (http://www.flickr.com/photos/94325214@N02/10260312165/)
Setting up the lights/tape lines. Marring from clay and swirls across the door.
http://farm6.staticflickr.com/5484/10260294096_61b98d6f41_b.jpg (http://www.flickr.com/photos/94325214@N02/10260294096/)
50/50 of the driver door. The D300 left some haze. But dont worry i'll clean that right up.
http://farm8.staticflickr.com/7374/10260301905_3364c7994d_b.jpg (http://www.flickr.com/photos/94325214@N02/10260301905/)
50/50 of rear driver corner panel.
http://farm9.staticflickr.com/8263/10260186234_b08fd0b52f_b.jpg (http://www.flickr.com/photos/94325214@N02/10260186234/)
50/50 of rear passenger corner panel.
http://farm6.staticflickr.com/5529/10260273785_ae0f141135_b.jpg (http://www.flickr.com/photos/94325214@N02/10260273785/)
http://farm9.staticflickr.com/8126/10260265485_599fa628a6_b.jpg (http://www.flickr.com/photos/94325214@N02/10260265485/)
50/50 of top of the car
http://farm8.staticflickr.com/7457/10260359753_689fa2b628_b.jpg (http://www.flickr.com/photos/94325214@N02/10260359753/)
http://farm8.staticflickr.com/7413/10260246556_9fe04e41ca_b.jpg (http://www.flickr.com/photos/94325214@N02/10260246556/)
Done compounding. I started bright and early this morning around 5:45 AM.
http://farm8.staticflickr.com/7434/10260390233_2c48988f11_b.jpg (http://www.flickr.com/photos/94325214@N02/10260390233/)
Looks almost LSP ready right?
http://farm3.staticflickr.com/2889/10260377323_705331c36a_b.jpg (http://www.flickr.com/photos/94325214@N02/10260377323/)
Pulled it out into the sun to inspect any missing spots.
http://farm8.staticflickr.com/7336/10260237666_eaab18a421_b.jpg (http://www.flickr.com/photos/94325214@N02/10260237666/)
Time to make it shine. SPF was super easy to apply, and easier to wipe off. Worked between 3.5-4 on a black pad, 3-5 passes was all it needed. People who reviewed the product didnt lie that it gums up the pads!
http://farm9.staticflickr.com/8395/10260231486_99f3808496_b.jpg (http://www.flickr.com/photos/94325214@N02/10260231486/)
Time to coat with OC 2.0. This was my first time, and I think i did a pretty good job.
http://farm4.staticflickr.com/3834/10260524046_9ceed5b10d_b.jpg (http://www.flickr.com/photos/94325214@N02/10260524046/)
And now time for the money shots. Enjoy!
http://farm6.staticflickr.com/5482/10260536216_b5d8cb439d_b.jpg (http://www.flickr.com/photos/94325214@N02/10260536216/)
http://farm9.staticflickr.com/8268/10260648623_3d33c8a43f_b.jpg (http://www.flickr.com/photos/94325214@N02/10260648623/)
http://farm4.staticflickr.com/3773/10260546036_a621222321_b.jpg (http://www.flickr.com/photos/94325214@N02/10260546036/)
http://farm3.staticflickr.com/2844/10260655673_799b374403_b.jpg (http://www.flickr.com/photos/94325214@N02/10260655673/)
http://farm6.staticflickr.com/5326/10260451334_f8dc1b245a_b.jpg (http://www.flickr.com/photos/94325214@N02/10260451334/)
http://farm8.staticflickr.com/7451/10260565735_a6e65b40e6_b.jpg (http://www.flickr.com/photos/94325214@N02/10260565735/)
Dont mind the dirty glass
http://farm6.staticflickr.com/5536/10260457474_7668f82881_b.jpg (http://www.flickr.com/photos/94325214@N02/10260457474/)
http://farm3.staticflickr.com/2812/10260801326_e4562b65d2_b.jpg (http://www.flickr.com/photos/94325214@N02/10260801326/)
http://farm6.staticflickr.com/5518/10260438694_4840ba1771_b.jpg (http://www.flickr.com/photos/94325214@N02/10260438694/)
I didnt know what to expect, so i went light, but realized after the first two panels that I was going too light. So I went back around and added another thin coat. Does this applicator tend to marr the paint? I know Honda paint is super soft, so in certain areas, I noticed some marring that werent there before I began coating. What can i do about this? Lightly polish and reapply another layer of OC within 30 days? I'm sure the more I do it, the better i'll get. I'll be taking the wheels off and coating them this week.
Total time spent: 13 hours.
Exterior:
Meguiars APC
Meguiars D300/M105
Sonax Perfect Finish
Mild Clay
Opti Coat 2.0
Opti Tire Gel
MF/Black pads
Various Microfibers
I dont have very many before shots, but here is what my car looked like Wednesday after it rained some.
http://farm6.staticflickr.com/5487/10263036784_b58d709b9c_b.jpg (http://www.flickr.com/photos/94325214@N02/10263036784/)
http://farm4.staticflickr.com/3679/10263127566_c7a84ec971_b.jpg (http://www.flickr.com/photos/94325214@N02/10263127566/)
I started to actually begin correcting, but only finished the hood/fender sealing it up with BFWD to see if I liked the look. It was okay, but I wanted more. So here begins the real write up.
Washed with Dawn Soap to make sure all old wax was gone. I knew that the sealant would remain, but I knew i was going to polish it off anyways. Heres how it sat after a wash.
Clean Right?.....
http://farm4.staticflickr.com/3714/10260317946_9897840d4f_b.jpg (http://www.flickr.com/photos/94325214@N02/10260317946/)
Began claying, and this came off half the trunk
http://farm6.staticflickr.com/5483/10263600633_c3dc39f319_b.jpg (http://www.flickr.com/photos/94325214@N02/10263600633/)
Swirls and marring from the mild clay
http://farm3.staticflickr.com/2829/10260217544_d1b8843c8e_b.jpg (http://www.flickr.com/photos/94325214@N02/10260217544/)
http://farm4.staticflickr.com/3739/10260322385_7c5ab9ecff_b.jpg (http://www.flickr.com/photos/94325214@N02/10260322385/)
Overall the paint wasnt too bad. This was a shot of the fender I corrected about a month ago.
http://farm4.staticflickr.com/3768/10260315135_5065b4e234_b.jpg (http://www.flickr.com/photos/94325214@N02/10260315135/)
Etchings over the hood from the recent rain/dirt stains. I thought BFWD wouldve held up a bit better. Unless I didnt wash thoroughly enough.
http://farm4.staticflickr.com/3754/10260199784_6f1b703ed4_b.jpg (http://www.flickr.com/photos/94325214@N02/10260199784/)
http://farm6.staticflickr.com/5333/10260312165_16e0f59989_b.jpg (http://www.flickr.com/photos/94325214@N02/10260312165/)
Setting up the lights/tape lines. Marring from clay and swirls across the door.
http://farm6.staticflickr.com/5484/10260294096_61b98d6f41_b.jpg (http://www.flickr.com/photos/94325214@N02/10260294096/)
50/50 of the driver door. The D300 left some haze. But dont worry i'll clean that right up.
http://farm8.staticflickr.com/7374/10260301905_3364c7994d_b.jpg (http://www.flickr.com/photos/94325214@N02/10260301905/)
50/50 of rear driver corner panel.
http://farm9.staticflickr.com/8263/10260186234_b08fd0b52f_b.jpg (http://www.flickr.com/photos/94325214@N02/10260186234/)
50/50 of rear passenger corner panel.
http://farm6.staticflickr.com/5529/10260273785_ae0f141135_b.jpg (http://www.flickr.com/photos/94325214@N02/10260273785/)
http://farm9.staticflickr.com/8126/10260265485_599fa628a6_b.jpg (http://www.flickr.com/photos/94325214@N02/10260265485/)
50/50 of top of the car
http://farm8.staticflickr.com/7457/10260359753_689fa2b628_b.jpg (http://www.flickr.com/photos/94325214@N02/10260359753/)
http://farm8.staticflickr.com/7413/10260246556_9fe04e41ca_b.jpg (http://www.flickr.com/photos/94325214@N02/10260246556/)
Done compounding. I started bright and early this morning around 5:45 AM.
http://farm8.staticflickr.com/7434/10260390233_2c48988f11_b.jpg (http://www.flickr.com/photos/94325214@N02/10260390233/)
Looks almost LSP ready right?
http://farm3.staticflickr.com/2889/10260377323_705331c36a_b.jpg (http://www.flickr.com/photos/94325214@N02/10260377323/)
Pulled it out into the sun to inspect any missing spots.
http://farm8.staticflickr.com/7336/10260237666_eaab18a421_b.jpg (http://www.flickr.com/photos/94325214@N02/10260237666/)
Time to make it shine. SPF was super easy to apply, and easier to wipe off. Worked between 3.5-4 on a black pad, 3-5 passes was all it needed. People who reviewed the product didnt lie that it gums up the pads!
http://farm9.staticflickr.com/8395/10260231486_99f3808496_b.jpg (http://www.flickr.com/photos/94325214@N02/10260231486/)
Time to coat with OC 2.0. This was my first time, and I think i did a pretty good job.
http://farm4.staticflickr.com/3834/10260524046_9ceed5b10d_b.jpg (http://www.flickr.com/photos/94325214@N02/10260524046/)
And now time for the money shots. Enjoy!
http://farm6.staticflickr.com/5482/10260536216_b5d8cb439d_b.jpg (http://www.flickr.com/photos/94325214@N02/10260536216/)
http://farm9.staticflickr.com/8268/10260648623_3d33c8a43f_b.jpg (http://www.flickr.com/photos/94325214@N02/10260648623/)
http://farm4.staticflickr.com/3773/10260546036_a621222321_b.jpg (http://www.flickr.com/photos/94325214@N02/10260546036/)
http://farm3.staticflickr.com/2844/10260655673_799b374403_b.jpg (http://www.flickr.com/photos/94325214@N02/10260655673/)
http://farm6.staticflickr.com/5326/10260451334_f8dc1b245a_b.jpg (http://www.flickr.com/photos/94325214@N02/10260451334/)
http://farm8.staticflickr.com/7451/10260565735_a6e65b40e6_b.jpg (http://www.flickr.com/photos/94325214@N02/10260565735/)
Dont mind the dirty glass
http://farm6.staticflickr.com/5536/10260457474_7668f82881_b.jpg (http://www.flickr.com/photos/94325214@N02/10260457474/)
http://farm3.staticflickr.com/2812/10260801326_e4562b65d2_b.jpg (http://www.flickr.com/photos/94325214@N02/10260801326/)
http://farm6.staticflickr.com/5518/10260438694_4840ba1771_b.jpg (http://www.flickr.com/photos/94325214@N02/10260438694/)
I didnt know what to expect, so i went light, but realized after the first two panels that I was going too light. So I went back around and added another thin coat. Does this applicator tend to marr the paint? I know Honda paint is super soft, so in certain areas, I noticed some marring that werent there before I began coating. What can i do about this? Lightly polish and reapply another layer of OC within 30 days? I'm sure the more I do it, the better i'll get. I'll be taking the wheels off and coating them this week.
Total time spent: 13 hours.