View Full Version : Might this be orange peal?
parttimer
09-06-2013, 04:18 PM
Looking at my Chrysler today I got to wondering. I took this picture.. I have noticed this effect on just about every car I own.
Sent from my LG-E970 using Tapatalk 2
parttimer
09-06-2013, 04:19 PM
Well it didn't attach, try again!
Sent from my LG-E970 using Tapatalk 2
ken tuep
09-06-2013, 04:22 PM
Yes
Sent from my SAMSUNG-SGH-I777 using AG Online
hernandez.art13
09-06-2013, 05:06 PM
Yes it's orange peel. Has this been repainted or is it stock?
parttimer
09-06-2013, 05:14 PM
Brand new, well 2012 Chrysler SRT, I have it on my RAM as well.
Sent from my LG-E970 using Tapatalk 2
hernandez.art13
09-06-2013, 05:19 PM
This is normal for stock cars
So either, live with it, or have it repainted with additional layers of CC to get that smooth mirror finish
hernandez.art13
09-06-2013, 05:22 PM
Theres other steps you can take too, but that is a whole different process
erichaley
09-06-2013, 08:10 PM
Factory orange peel can be removed, but two things are required: A Paint Thickness Gauge, and balls of steel...
Evan.J
09-06-2013, 08:26 PM
Factory orange peel can be removed, but two things are required: A Paint Thickness Gauge, and balls of steel...
In this situation I think the Balls of steel would be more important lol! Good one Eric! :props:
In all honesty though the risk is just not worth the reward when it comes to factory baked on clear coats and the orange peel.
Iron400
09-06-2013, 11:46 PM
Don't feel bad, my brand new 2013 F150 has bad orange peel. The hood and roof being the worse, the sides not as noticeable but much beyond I like. Before I bought it I noticed it, so I checked the other trucks on the lot, they all had it, some even worse!
Here's my hood.....
http://i764.photobucket.com/albums/xx282/ironhide400/20130906_232747_zps1d7c2273.jpg
http://i764.photobucket.com/albums/xx282/ironhide400/20130906_232608_zps7c883af7.jpg
custmsprty
09-07-2013, 12:02 AM
Factory orange peel can be removed, but two things are required: A Paint Thickness Gauge, and balls of steel...
:haha::doh::applause:
BillE
09-07-2013, 06:36 AM
Factory orange peel can be removed, but two things are required: A Paint Thickness Gauge, and balls of steel...
Three words that says it all.
Well said Eric (plus humorous)...
Bill
parttimer
09-07-2013, 09:22 AM
I think I'll pass! I'll just leave it as is.
Sent from my LG-E970 using Tapatalk 2
wompasaurus
09-07-2013, 11:05 AM
didn't carpro make the velvet pad for factory paint orange peel removal? obviously you would still need a paint thickness gauge. but couldn't it be corrected with that pad?
Detailing by M
09-07-2013, 12:20 PM
you can sand that out or polish it with a Demim pad.
Either way it's fixable.
You just have to know what your doing.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.