PDA

View Full Version : Non staining wax/sealant



c8n
08-12-2013, 11:25 AM
I know that Meg's ULW does not stain rubber or plastic trims. What other wax/sealant will not stain trims?

Calendyr
08-12-2013, 11:45 AM
Power lock can be used on trims safelly.

Garry Dean's infinite juice can also be used safelly.

ski2
08-12-2013, 11:48 AM
DG 105 & 101 & 111 & 501 & Aquawax

Klasse Act
08-12-2013, 11:50 AM
I've never had ANY DG product stain my trim, Collinite either!

Sent from my SPH-M930 using AG Online

RPPM
08-12-2013, 01:07 PM
Poorboys Polish with Sealant, Klasse AIO, and Klasse SG are all trim safe.

Rsurfer
08-12-2013, 01:53 PM
I don't recall if Wolfgang 3.0 stains trim.Feed back please

umi000
08-13-2013, 11:03 PM
Opti-Seal, KSG, UPGP, BFCS, BFWD - lots of these around...

Rsurfer
08-14-2013, 04:20 AM
Opti-Seal, KSG, UPGP, BFCS, BFWD - lots of these around...

BFWD does stain trim.

PA DETAILER
08-14-2013, 10:00 AM
max wax does not stain trim.

Pureshine
08-14-2013, 10:02 AM
+1 on Menz Power lock :)

Marc Hufnagel
08-14-2013, 10:04 AM
DG 501 doesn't stain? Every place I've ever managed to hit however carefully I work turns an off-white color and almost impossible to get off.

1fastTbird
08-14-2013, 10:11 AM
I don't recall if Wolfgang 3.0 stains trim.Feed back please

I have experienced light staining with WG 3.0 sealant. I now take the extra time to carefully tape off the trim as it saves time in the end.

Setec Astronomy
08-14-2013, 10:25 AM
Clearly (ha ha) the WOWA sealants are going to be your best bet. I also have found that DG and Zaino sealants don't (including 501), nor do the Collinites.

umi000
08-14-2013, 08:28 PM
BFWD does stain trim.

Hmmm. I've not had an issue in my case, but it could be a difference in the type of plastic or the age of the trim.