Wax Spinning In The Jar

[sjb89]

Has anyone run into the problem with paste wax spinning in the jar while spinning the applicator to load the wax ? This is especially a problem with the smaller sized jars. There is no way to "hold" the wax from rotating while spinning the applicator. I was wondering what others do to solve the "spinning wax issue" ?

[swanicyouth]

Hi, from Limerick PA. I just go back and forth instead or circles.

[Rsurfer]

Put the jar in a steamer, it doesn't have to melt 100%.

[hoyt66]

Hi, from Limerick PA. I just go back and forth instead or circles.

X2^^

[RTexasF]

Stab it with a fork, pull it out then apply it to whatever you want.

[hoyt66]

Stab it with a fork, pull it out then apply it to whatever you want.

Too risky. You would weaken the wax and possibly break it and drop it when applying it to your pad. Every time you do this the more the chance of it. Don't do this IMO.

[Dogfather]

Float it in a pan of simmering water. Let it melt a little. Should be ok after it cools.

[parttimer]

I flip my fuzion container upside down so the puck falls on the lid. Then go back and forth with the pad, not circles.