beamerstrumpet
08-02-2013, 01:46 PM
Here is the product 1/4 used. A little goes a long way.
http://www.autogeekonline.net/gallery/data/500/DSCF0735.JPG
Here are the before pics.
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0738.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0740.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0741.JPG
This is Right
side, I forgot to say that in pic:
http://www.autogeekonline.net/gallery/data/500/DSCF0745.JPG
As I said it only takes a little bit. This is what I used for the R mirror. before and after.
http://www.autogeekonline.net/gallery/data/500/DSCF0742.JPGhttp://www.autogeekonline.net/gallery/data/500/DSCF0743.JPGIt was not too bad. Next I used about the same amount for the Break lever.http://www.autogeekonline.net/gallery/data/500/DSCF0747.JPG
BTW in my pics I just realized I had a dyslexic moment and may have called some of the Left ones R and som of the Right Left (as you faced the bike I was right LOLOLOLOL)
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0746.JPG
http://www.autogeekonline.net/gallery/data/500/DSCF0748.JPGYou will see I did not get real close to doing all of it,, lets say its a 50/50 shall we. :)
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0749.JPG
http://www.autogeekonline.net/gallery/data/500/DSCF0750.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0751.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0752.JPG
So as you can see, its great stuff. No scratches and a very nice smell. None of the ammonia like some of the others. I also did this in about 10 min. So I didnt take a long time to buff and check. I picked mirrors and levers because they are usually the most neglected parts.
Hope you all enjoyed.
http://www.autogeekonline.net/gallery/data/500/DSCF0735.JPG
Here are the before pics.
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0738.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0740.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0741.JPG
This is Right
side, I forgot to say that in pic:
http://www.autogeekonline.net/gallery/data/500/DSCF0745.JPG
As I said it only takes a little bit. This is what I used for the R mirror. before and after.
http://www.autogeekonline.net/gallery/data/500/DSCF0742.JPGhttp://www.autogeekonline.net/gallery/data/500/DSCF0743.JPGIt was not too bad. Next I used about the same amount for the Break lever.http://www.autogeekonline.net/gallery/data/500/DSCF0747.JPG
BTW in my pics I just realized I had a dyslexic moment and may have called some of the Left ones R and som of the Right Left (as you faced the bike I was right LOLOLOLOL)
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0746.JPG
http://www.autogeekonline.net/gallery/data/500/DSCF0748.JPGYou will see I did not get real close to doing all of it,, lets say its a 50/50 shall we. :)
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0749.JPG
http://www.autogeekonline.net/gallery/data/500/DSCF0750.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0751.JPG
http://www.autogeekonline.net/gallery/data/500/medium/DSCF0752.JPG
So as you can see, its great stuff. No scratches and a very nice smell. None of the ammonia like some of the others. I also did this in about 10 min. So I didnt take a long time to buff and check. I picked mirrors and levers because they are usually the most neglected parts.
Hope you all enjoyed.