Aluminum trailer

[Triple Shine]

Anyone ever done an aluminum trailer?

Got a 40' black trailer to do. Got some Klasse AIO to do it with. Any suggestions?

[Triple Shine]

Im going at it with a PC DA and foam pads. Ill post before and after pics when I'm done....see how it turns out!

[sproketser]

Will look forward to it mate .

[Vegas Transplant]

Curiosity piqued.

[hernandez.art13]

Subscribed and good luck!

[dad07]

Just a word of caution...the paint on aluminum trailers is uber THIN
Don't expect perfection.

Good luck. And look forward to seeing your results.

[Dr_Pain]

Just a word of caution...the paint on aluminum trailers is uber THIN
Don't expect perfection.

Good luck. And look forward to seeing your results.

:whs:

Test spot with the AIO to dial in the pad and make sure not to let the pad get too hot. I would not even worry about trying to play with other compounds. AIO is the way to go :props:

[Triple Shine]

Ok here's my results.

Took a good 5-6 hrs with the Klasse AIO.

Pad got gummed up BAD about every TWO rotations!!! It was terrible. Orange pad? I think not. Black.

Before pic. Black trailer - oxidized and dull.

20189

[Triple Shine]

Here's a full shot of the side - before.

20190

And rear shot - before.

20191

[Triple Shine]

Okay you've waited long enough.

Test spot....

20192

And after pic...

20193

20194

Before
20196

After
20195

[Triple Shine]

Now I will say the Klasse AIO left 'streaks' behind that drove me completely nuts. I thought I was using too much product but tried less, then way less and got the same results. Still not sure why. I had to clean the pad often as it gummed up rapidly on the PC DA.

Any idea what caused the streaking?

[sproketser]

Great results on that trailer mate ! Must ve been a pain to do right !

[Triple Shine]

Thanks! Yes it was a pain....the worst part was the streaks...don't know why