PDA

View Full Version : Dewalt Sander as a polisher?


agarabaghi
07-12-2013, 08:45 AM
I know it is not advised as the sander spins way too fast, but I was wondering if a pad is described as

"Hook and loop fasteners cover the entire back of each pad to provide a secure hold on the backing plate. "

Will it stick to the plate on the dewalt sander that acts almost like Velcro for the sand paper pads?
Vegas Transplant
07-12-2013, 08:51 AM
model # ?
agarabaghi
07-12-2013, 08:52 AM
D26451
Vegas Transplant
07-12-2013, 09:12 AM
http://www.autogeekonline.net/gallery/data/500/this_one.jpg (http://www.autogeekonline.net/gallery/showphoto.php/photo/61207)

If you don't get the answer, then use the search feature on the forum. I saw a thread within the last year on this topic.

Edit:OPM's seem rather high for paint correction.


•3.0 Amp motor operates at 12,000 opm, providing maximum sanding speed for smooth finishes
Vegas Transplant
07-12-2013, 09:36 AM
Looking at the image, it would seem that the pad would come into contact with the body of the unit as pressure is applied.

What are you trying to accomplish?
agarabaghi
07-12-2013, 10:37 AM
Its for the boat ... I found 6" pads which have hook and loop backing so i just wanted to know if they would attach to the dewalt... I usually just use a 7" bonmett but if these pads stick to them that would make my life easier
Vegas Transplant
07-12-2013, 11:04 AM
I don't see why not. Most bp's are 'male' hook & loop. Most pads are 'female' felt-like material.

Good luck
Happy detailing...:buffing:
agarabaghi
07-12-2013, 11:31 AM
Awesome ... Wait till you see the condition I have my work cut out
Becciasm
07-12-2013, 12:02 PM
Keep us posted!

Sent from my VS840 4G using AG Online
SonOfOC
07-12-2013, 12:43 PM
It will not work. It will just buzz in one spot and not rotate properly.


I know it is not advised as the sander spins way too fast, but I was wondering if a pad is described as

"Hook and loop fasteners cover the entire back of each pad to provide a secure hold on the backing plate. "

Will it stick to the plate on the dewalt sander that acts almost like Velcro for the sand paper pads?
agarabaghi
07-12-2013, 02:15 PM
It will not work. It will just buzz in one spot and not rotate properly.

Well I know for a fact it actually works for what I am trying to do. But I use the bonnets and they don't fit properly. I picked up 2 cheapo pads from a place I wont mention and will post my results.

The process for the hull will be
- On / Off acid scrub
- Wash
- Compound
- Oxidation removal
- Wax

Let the fun begin!