Fitting smaller pads on Griots 6"

[Jon K]

What backing plate do I need in order to fit smaller pads onto the Griots 6"?

Thanks,
Jon

[erichaley]

Lake Country 5" BP

[Mike Phillips]

Here you go Jon...

Links to products on store so all you have to do is >click< on what you're interested in. Plus lots of pictures and information.

5 inch Backing Plates on Meguiar's, Griot's and Porter Cable DA Polishers (http://www.autogeekonline.net/forum/auto-detailing-tools-accessories/48668-5-inch-backing-plates-meguiar-s-griot-s-porter-cable-da-polishers.html)


The above and a lot more can be found on my article list. Link to my article list is at the bottom of all my posts.


:)

[Jon K]

Thanks guys!

Edit: Do the PC 7424 and Griots 6" have the same backing plate thread and all? I have a backing plate for my PC, maybe I can just use that?

[erichaley]

Thanks guys!

Edit: Do the PC 7424 and Griots 6" have the same backing plate thread and all? I have a backing plate for my PC, maybe I can just use that?

Yes, they do

[Mike Phillips]

Thanks guys!

Edit: Do the PC 7424 and Griots 6" have the same backing plate thread and all? I have a backing plate for my PC, maybe I can just use that?


Yes, 5/16" fine thread.

Make sure you always use a compression washer. I have articles on this in my article list too as well as cover this in my how-to book.



:)

[CBlack]

Are there any smaller backing plates for the GG?

[Rsurfer]

are there any smaller backing plates for the gg?

lc 3.5"

[BillyJack]

My favorite wax setup on my GG is the 4" Meg's pad with the recessed back for a 3" BP. It just fits inside the can of many paste waxes I use such as Collinite 476, FK1000 or Meg's M16. The quick reload of wax on the pad, combined with the maneuverability of the smaller, edge-cushioned pad around obstacles makes waxing a breeze. On a job that could use a little cleaning, I'll start with either Meg's D151 or DG 501/601 on a Meg's 4" yellow pad.

Bill