PDA

View Full Version : Applied Collinite 845 too heavy... Help


Pages : [1] 2
MrOneEyedBoh
06-19-2013, 06:24 PM
So I applied a coat too heavy.. Looked good earlier today. Now its hazey ... How can I get that haze off?
cleanmycorolla
06-19-2013, 06:30 PM
You can try detail spray, or apply lightly some more 845 in those areas, see if the solvents help buff it all off
zmanjohn
06-19-2013, 06:34 PM
You can try detail spray, or apply lightly some more 845 in those areas, see if the solvents help buff it all off

:iagree:had the same issue, just add a light coat with buffer or MF, wait for it to haze and wipe off. Worked for me.
MrOneEyedBoh
06-19-2013, 07:19 PM
I'll try some onrww... What ya thinn
cleanmycorolla
06-19-2013, 07:22 PM
I'll try some onrww... What ya thinn

Or you can do what two people suggested too, apply a little more 845. :props:
jjj
06-19-2013, 07:23 PM
:iagree:had the same issue, just add a light coat with buffer or MF, wait for it to haze and wipe off. Worked for me.

Agree a Lil of what was put on will help take it off usually.
MrOneEyedBoh
06-19-2013, 07:26 PM
Okay maybe do it by hand... The truck is an f250 crew cab. Not exactly small haha
mwoolfso
06-19-2013, 08:01 PM
I would do a rough and tough QD, confirm the haze has disappeared, and then a new layer of 845 spread extremely thin.
Klasse Act
06-19-2013, 08:03 PM
You could do a rinseless wash to even things out as well

Sent from my SPH-M930 using AG Online
MrOneEyedBoh
06-19-2013, 08:05 PM
I just noticed that I wiped it with a t shirt I had on... And the haze came off. Maybe it was just residue?
MrOneEyedBoh
06-19-2013, 08:51 PM
You could do a rinseless wash to even things out as well

Sent from my SPH-M930 using AG Online

Yeah I have diluted ONRWW. Maybe that will work
mwoolfso
06-19-2013, 10:01 PM
I just noticed that I wiped it with a t shirt I had on... And the haze came off. Maybe it was just residue?

I would call that a rough and tough QD for sure....
glen e
06-19-2013, 10:05 PM
This is why I don't really use 845 anymore - so many other products come off easier - even baked on after 10 hours!
mpkav
06-19-2013, 10:22 PM
I did Wolfgang sealant topped with 845 on my last detail. When I came out the next afternoon there was a haze like you are describing. It was almost like it was sweating a little bit. It wiped right off but I wasn't sure if it was the sealant creating a barrier or something else. I put it on super thin and it came off with ease. I thought it was a little odd though!!
MrOneEyedBoh
06-19-2013, 11:32 PM
This is why I don't really use 845 anymore - so many other products come off easier - even baked on after 10 hours!

lol like?