View Full Version : SSII Wax...
KJW Detailing
05-31-2007, 12:15 PM
I am about to use the SSII wax on my car for the first time...
I know that its a WOWO wax...but can i apply to the entire car and then come back and take it off? or is the WOWO better?
Also, can i apply two coats one right after the next or should i wait until the next time i wash my car and put the second coat on then?
Thanks!
wytstang
05-31-2007, 12:21 PM
Better to WOWO cause if it's like MaxWax it becomes harder to remove and no benefits. I would wait an hour then add 2nd coat. .02
supercharged
05-31-2007, 01:02 PM
Better to WOWO cause if it's like MaxWax it becomes harder to remove and no benefits. I would wait an hour then add 2nd coat. .02
:iagree: SSII is very similar to Max Wax, and WOWO method will be the best thing. Wait 1 hour between coats.
trhland
05-31-2007, 02:09 PM
the problem with waiting an hour between coats is the car starts getting dusty:confused:
Gary Sword
05-31-2007, 02:55 PM
Definitely WOWO it. You will be sorry if you don't.
I agree with all of the above responses. Do one panel, wipe it off, move on to the next panel.
ScottB
05-31-2007, 07:45 PM
follow the manufacturers design for best outcome. WOWO is the preferred method on all Pinnacle pastes.
KJW Detailing
05-31-2007, 08:25 PM
thanks everyone! well i finished and i have to honestly say that before starting i was unsure whether or not i would truely see any differences...wel after going over a few panels with i could see alot more pearl "flakes" popping off the paint!
i cant wait until i get the PC and the Pink moose so that i can do a full detail on the car and really maki it sparkle and shine!
SSII FTW with flakes!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.