orngez
05-26-2007, 05:22 PM
So I have been patiently waiting for my foam cannon/lance to arrive....hehe...it was worth the wait
....i like the all brass and metal design of it...this thing is going to be bullet proof (i hope :p) looks simialr to others i have seen...just instead of the quick disconnect fitting of gas washers...this one has the twist and pull lock connector found on electric karcher pressure washers...whats nice is the threaded design of the connector allows you to switch it out to fit other pressure washer connections as well...its also two way adjustable...you can turn the nozzle to adjust the spray pattern to fan on jet (and everything inbetween) and the dilution ratio is adjustable by the knob on top...
http://www.autogeekonline.net/gallery/data/565/Picture_043.jpg
I decided to do a "get the dust off wash" so i presprayed the car with a mix of onr and 1/2 oz of wash n gloss....then i did a full spray down with 2oz of wash n gloss which is seen in the next pic...its a 1 liter bottle...so i filled the rest with water....i can tell you right now i could have easily used less...just being my first time using this i wanted to have some fun....
http://www.autogeekonline.net/gallery/data/565/Picture_037.jpg
Now on to the FOAM!!! i let it sit for 10 minutes while i enjoyed a beer to let the wash n gloss do its work...the clinging foam helps let the soap do the work to emulsify and encapsulate dirt...
http://www.autogeekonline.net/gallery/data/565/Picture_039.jpg
This stuff was going on like shaving cream
http://www.autogeekonline.net/gallery/data/565/Picture_038.jpg
My garage floor was quickly turning into a foam party as i rinsed this stuff off....
http://www.autogeekonline.net/gallery/data/565/Picture_041.jpg
Its EVERYWHERE!!!
http://www.autogeekonline.net/gallery/data/565/Picture_040.jpg
After flood rinsing off all the foam...mind you i have yet to bring out a bucket or wash mitt...i simply misted the entire car down with ONE....and then followed with a cobra mf towel...not a spec of dirt on the towel when i was done...no marring and the paint was already squeaky clean before misting with ONE...i just did it anyway to help the drying process and just extra insurance to get any last grit off the paint...i slapped on a layer of petes53 and this is what i ended up with
http://www.autogeekonline.net/gallery/data/565/Picture_044.jpg
:cheers:
....i like the all brass and metal design of it...this thing is going to be bullet proof (i hope :p) looks simialr to others i have seen...just instead of the quick disconnect fitting of gas washers...this one has the twist and pull lock connector found on electric karcher pressure washers...whats nice is the threaded design of the connector allows you to switch it out to fit other pressure washer connections as well...its also two way adjustable...you can turn the nozzle to adjust the spray pattern to fan on jet (and everything inbetween) and the dilution ratio is adjustable by the knob on top...
http://www.autogeekonline.net/gallery/data/565/Picture_043.jpg
I decided to do a "get the dust off wash" so i presprayed the car with a mix of onr and 1/2 oz of wash n gloss....then i did a full spray down with 2oz of wash n gloss which is seen in the next pic...its a 1 liter bottle...so i filled the rest with water....i can tell you right now i could have easily used less...just being my first time using this i wanted to have some fun....
http://www.autogeekonline.net/gallery/data/565/Picture_037.jpg
Now on to the FOAM!!! i let it sit for 10 minutes while i enjoyed a beer to let the wash n gloss do its work...the clinging foam helps let the soap do the work to emulsify and encapsulate dirt...
http://www.autogeekonline.net/gallery/data/565/Picture_039.jpg
This stuff was going on like shaving cream
http://www.autogeekonline.net/gallery/data/565/Picture_038.jpg
My garage floor was quickly turning into a foam party as i rinsed this stuff off....
http://www.autogeekonline.net/gallery/data/565/Picture_041.jpg
Its EVERYWHERE!!!
http://www.autogeekonline.net/gallery/data/565/Picture_040.jpg
After flood rinsing off all the foam...mind you i have yet to bring out a bucket or wash mitt...i simply misted the entire car down with ONE....and then followed with a cobra mf towel...not a spec of dirt on the towel when i was done...no marring and the paint was already squeaky clean before misting with ONE...i just did it anyway to help the drying process and just extra insurance to get any last grit off the paint...i slapped on a layer of petes53 and this is what i ended up with
http://www.autogeekonline.net/gallery/data/565/Picture_044.jpg
:cheers: