PDA

View Full Version : Applying Natty's Blue


JBs
05-23-2007, 09:04 PM
can i use the PC to apply it? what pad should i use? or how else could i apply it (i don't think i have any applicator pads
budman3
05-23-2007, 09:40 PM
You could apply it via PC but that isn't the designed application method. If you do go this route use the softest finishing pad you have. Or go to Wal MArt or any auto parts store and pick up some foam applicators or even MF applicators...
tod071
05-23-2007, 10:00 PM
I've used NB on a pc and actually found it pretty easy. Easy to jiggle out of the container and rub in a couple times around a black pad and easily cover a couple of panels.
Surfer
05-23-2007, 10:09 PM
NB by PC is easy, I use a very soft 4" Edge Blue Polishing pad. I can do my truck in a fraction of the time it takes by hand and I seem to use less product, makes for a nice, thin, even coat. PC rocks for applying waxes if you have the right pad.
Rsurfer
05-23-2007, 10:16 PM
NB by PC is easy, I use a very soft 4" Edge Blue Polishing pad. I can do my truck in a fraction of the time it takes by hand and I seem to use less product, makes for a nice, thin, even coat. PC rocks for applying waxes if you have the right pad.

I agree Surfer, but did you see the poll? 70.5% by hand and only 29.5% by machine. It's so much easier by machine and twice as fast with great coverage. Wonder how many of those 70.5% have tried the pc?
Surfer
05-23-2007, 10:20 PM
I agree Surfer, but did you see the poll? 70.5% by hand and only 29.5% by machine. It's so much easier by machine and twice as fast with great coverage. Wonder how many of those 70.5% have tried the pc?Some said they just prefer by hand to "caress" their vehicles I guess, I could care less, when you have 6+ vehicles...I want it done as quickly as possible...suv's are a pain lol.
JBs
05-24-2007, 01:34 AM
what if i only have a gray pad?
AUdakota
05-24-2007, 01:48 AM
unless you have a super soft finishing pad you might as well just go to the store and pick up some foam or MF applicators.
JBs
05-24-2007, 02:13 AM
alrighty... pepboys work? ;)
klumzypinoy
05-24-2007, 03:27 AM
alrighty... pepboys work? ;)

Look for the Meguiars foam pads :D
Grimm
05-24-2007, 07:02 AM
I do it by PC as well. The wax easily comes out of the jar, and I only need a couple quick swipes across the pad and I'm good to go for an entire panel. My fingers hurt after a while doing it by hand, so I like the PC just for that reason alone.