PDA

View Full Version : the spyker


Pages : [1] 2
extreme-detail
05-23-2007, 05:57 AM
we got this job on the back off the scotish motor fair
when we were setting up the 3 lambo`s that our clients very kindly lent us for the weekend the owner of the spyker came over and said WOW when can you do the spyker not even how much will it cost but when. he then said our cars on display are showing up his 3 cars :D
so on monday there it was leave the house at 5 in the morning rubbing the sleep out of my eye`s, so went to pick up and then down that A9 following that sat nav to livingstone
so first off was pre soak the spyker with the citrus then to put the extreme foam ontop leave to dwell then rinse off. after the pre soak time to wash with the 2 buckets and wash mitts and dry off with the sonus der wunder towel
now time to check the paint :doublesho
now this car is new and only 254 miles on the clock and god what a mess
not only with very bad swirls but it was also covered in light scratches as if someone had taken one of those ruber blades to dry it off and also the front looked as if there had been stone chips touched up
before
http://i13.photobucket.com/albums/a253/xtrememike_/spyker002.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker004.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker005.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker013.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker023.jpg
as you can see its a bit of a mess
so we took the paint readings on all panels and downloaded to the laptop
then masked up the car using nearly 3 rolls of tape
the front needed wet sanded along with the rear off side qaurter panel as we felt the state of the paint was that bad the only way to get a perfect finish was wet sanding
http://i13.photobucket.com/albums/a253/xtrememike_/spyker015.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker017.jpg
wet sanding we used meg`s unigritt 2500
after the wet sanding we got the makita`s out with cutting pads and the power gloss
we also had to use the power gloss on most of the other panels
next was the menzerna IP with a 3m polishing pad for the whole of the car
after the IP we went for the menzerna final finishing polish with a 3m finishing bad
after
http://i13.photobucket.com/albums/a253/xtrememike_/spyker021.jpg
we finished the taping of the car at 10 and we finished the paint work corection at 5 :wall: onlly stopping for 15 mins for lunch
once we were happy with the paint it was time to cleanse the paint work
so out with the HD cleanse this helps the wax to bond with the paint and for this we dont use any other product
so now the paint work was cleansed it was time to get the vintage out
as always the vintage was put on with my bare hands
the wheels were also treated to the HD cleanse and vintage
the glass was cleaned with the HD cleanse
all alloy was polished up
the head lights were de swirled
here`s some after pics hope you like
http://i13.photobucket.com/albums/a253/xtrememike_/spyker026.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker025.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker027.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker024.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker029.jpg
extreme-detail
05-23-2007, 05:58 AM
http://i13.photobucket.com/albums/a253/xtrememike_/spyker030.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker037.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker031.jpg
some of the inside
http://i13.photobucket.com/albums/a253/xtrememike_/spyker034.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker035.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker033.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker032.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker039.jpg
some pics outside
http://i13.photobucket.com/albums/a253/xtrememike_/spyker043.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker044.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker048.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker053.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker054.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker056.jpg
http://i13.photobucket.com/albums/a253/xtrememike_/spyker057.jpg
we were very happy with the out come of this job even though i didn`t get home till 12 at night
thanks for taking the time to read this post
mike @ extreme detail
Gary Sword
05-23-2007, 06:43 AM
Looks great! You have to wonder what they previously used wash that car to leave the paint in such poor shape.
Nica
05-23-2007, 09:05 AM
Great write up, I enjoyed it. I'm with Gary on this one, what the heck did they use on that poor thing to cause it so much swirls and the damange to the paint. For a high end vehicle it was in poor poor shape.

But you sure turned it around, I really enjoyed the pictures and the walk through...I really liked it.

I got a question for you, what is the advantage to load the paint gauge readings to the laptop? What's the purpose? Just wondering that's all.

Thanks for sharing, that is one sweet detail there and the vehicle is wicked.
Surfer
05-23-2007, 09:16 AM
Now theres a rare car, seen one down here.
P1et
05-23-2007, 10:18 AM
The little Dutch car... Nice detail!
extreme-detail
05-23-2007, 10:44 AM
Great write up, I enjoyed it. I'm with Gary on this one, what the heck did they use on that poor thing to cause it so much swirls and the damange to the paint. For a high end vehicle it was in poor poor shape.

But you sure turned it around, I really enjoyed the pictures and the walk through...I really liked it.

I got a question for you, what is the advantage to load the paint gauge readings to the laptop? What's the purpose? Just wondering that's all.

Thanks for sharing, that is one sweet detail there and the vehicle is wicked.

we keep all readings of our clients cars on my laptop so we have it on record then the next time we do a top up on it we can re check to make sure no one else has done any work on it
rscpa
05-23-2007, 10:59 AM
You perfomed great work on that thing...... looks like that car would be loud when started up and going!
id-type-s
05-23-2007, 11:47 AM
amzing work!!!
DavidJ021
05-23-2007, 12:03 PM
Wow great work.

I thought the paint gauge readings were to see the difference of paint thickness in the paint, by reading each body panel?
guidosrx8
05-23-2007, 12:14 PM
absolutly beautiful!!!! looks amazing.
extreme-detail
05-26-2007, 10:17 AM
Wow great work.

I thought the paint gauge readings were to see the difference of paint thickness in the paint, by reading each body panel?

that is the reason why i have a paint gauge but also down load them onto the lap top
Truls
05-26-2007, 11:11 AM
Great work,.

Looks like washing without hosing the grit of first. Something is wrong when you guys have to wetsand a spyker`s paint to get the "looks" back.
Shame on the owner, all creds to you at ED
Crusader101
05-26-2007, 11:13 AM
Great job! :applause:

The Spyker is a beautiful jewel of a car.
ehuth1
05-26-2007, 12:08 PM
Great job!! Love the exotics.