Help with DG 105 please....

[YankeeFan]

Just applied 601 and waiting 30 minutes to apply 105. But not sure of the sequence...is it apply 105, wipe off, wait 12 hrs to apply wax or is it apply 105 wait 12 hrs then wipe off then apply wax?

Howard

[ScottB]

you can wipe the sealant off after around 15 minutes on average. Then allow the sealant to cure up to 24 hours before coating or topping.

[Whitethunder46]

If you havent done it yet, DG's #105 recommends 30min. to "flash" and then wipe off. If it is very humid, wait around 45min-1hour and wipe off.

[sparkie]

I always wait 45min-1hour and wipe off the #105. You can go with another coat of #105 or just wax the next day.

[YankeeFan]

I waited about 10-15 minutes. I guess that would just affect it's durability and not the appearnace.....true???

Howard

[Larry A]

It may take 10 minutes or 45 minutes depending on the weather. Do the swipe test with your finger.

[Al-53]

I was told to leave it on at least 30 minutes..but 45 was better..and if humid leave longer ..reason was the carrier agents flash and leave the sealant behind on the paint..so the more you let the sealant flash the better the sealant adheres to the paint...

For example..some have left Klasse Sealant on over nite and by doing this the removal was easy since the sealant and carrier was not mixed any more...this pertains to just SG not DG for the over nite procedure..but my point was...the longer you let it flash the better the product adheres...not all work this way...but the ones speaking of here do...

Al