CG blacklight?

[Anthony@zerboautoworks]

What pad should I use with BL? I want a little cleaning ability would CCS white polishing foam pad do what I need?

Thanks guys

[cleanmycorolla]

I usually use a flat 5 1/2" black lc pad

[Anthony@zerboautoworks]

I have a gg6, I don't want to buy a smaller backing plate.

[Jrocket]

I have a gg6, I don't want to buy a smaller backing plate.


I have a GG6 as well 3rd gen with a 5" backing plate and recommend you pick up a new backing plate.

5.5 pads are much easier to work with :xyxthumbs:


I have used blacklight with both White pads and Black pads

I would think a white or green pad would work perfect for you!

[Anthony@zerboautoworks]

I have a GG6 as well 3rd gen with a 5" backing plate and recommend you pick up a new backing plate.

5.5 pads are much easier to work with :xyxthumbs:


I have used blacklight with both White pads and Black pads

I would think a white or green pad would work perfect for you!

Which 5" backing plate did you use on your gg6?

[silverfox]

Any good finishing pad will work. Speed 3-4 on a PC polisher. Don't spin it like you would correcting paint. Work it slowly and not a lot of pressure.

[zmcgovern45]

+1 for 5.5" pads!

I use black light with black or blue LC pads.

[BlackHawk]

+1 for 5.5" pads!

I use black light with black or blue LC pads.

Same here :D blue seems too work really well with it in terms of very light swirls

[Anthony@zerboautoworks]

I went ahead and got the 5 inch backing plate and the 6 pack of 5.5 inch pads. I am super excited to use the combo BL+Pete's 53+V7.

[Detailer Daemon]

If you want to add a twist put some black wax from CG on before the Petes '53. Stunning deepness!

[Jrocket]

I went ahead and got the 5 inch backing plate and the 6 pack of 5.5 inch pads. I am super excited to use the combo BL+Pete's 53+V7.


Sounds Good!!


btw just got back on and read your earlier post. sorry for late reply.

I got this one http://media.commerce-search.net/340a98d43b3c0c13943e966ab1b0376f/6323fb188523560c19073760f5a58ab2?wm=0&h=125&w=125&bg=FFFFFF&src=http%3A%2F%2Fep.yimg.com%2Fca%2FI%2Fautogeek_2 254_255415471 (http://autogeek.commerce-search.net/redirect?url=http%3A%2F%2Fwww.autogeek.net%2Flc431 25.html) Dual-Action Hook&Loop Flexible Backing Plate 5" (http://autogeek.commerce-search.net/redirect?url=http%3A%2F%2Fwww.autogeek.net%2Flc431 25.html)

[Anthony@zerboautoworks]

Sounds Good!!


btw just got back on and read your earlier post. sorry for late reply.

I got this one http://media.commerce-search.net/340a98d43b3c0c13943e966ab1b0376f/6323fb188523560c19073760f5a58ab2?wm=0&h=125&w=125&bg=FFFFFF&src=http%3A%2F%2Fep.yimg.com%2Fca%2FI%2Fautogeek_2 254_255415471 (http://autogeek.commerce-search.net/redirect?url=http%3A%2F%2Fwww.autogeek.net%2Flc431 25.html) Dual-Action Hook&Loop Flexible Backing Plate 5" (http://autogeek.commerce-search.net/redirect?url=http%3A%2F%2Fwww.autogeek.net%2Flc431 25.html)

Yeah that's the same one I bought.

[john b]

does blacklght remove existing lsps? or is more like wetglaze 2.0? crs

[ngonzi]

I have a black truck. Would it be save to top black light with Wolfgang deep gloss paint sealant 3.0?

[zmcgovern45]

BL is more commonly topped with a wax (or V7), but you should be fine using WDGPS3.0 after allowing BL to cure for a bit.